Firestone W013587872 Industrial Air Springs Contitech FT530-35 726 Triple Pneumatic Actuator For HENDRICKSON AUX 004828

Industrial Air Springs Firestone W013587872 Contitech FT530-35 726 Triple Pneumatic Actuator For HENDRICKSON AUX. 004828

Cross Reference

Firestone style 333
Firestone W01-358-7872 / W01 358 7872 / W013587872
Firestone WO1-358-7872 / WO1 358 7872/ WO13587872

Contitech FT530-35 726 / FT 530-35 726 / FT 530 35 726 / FT530-35726/ FT53035726/65828

HENDRICKSON AUX. 004828


Specifications and Technical Parameters

About air springs

Compared with other springs, air spring light weight, small internal friction, has good vibration isolation and noise attenuation ability in high frequency vibration, and air spring can achieve better variable stiffness characteristics by adjusting the internal pressure, when the load on the spring increases, the gas in the closed container is compressed, the pressure rises, the spring stiffness increases; On the contrary, when the load is reduced, the pressure of the gas in the container decreases and the spring stiffness decreases. Therefore, when the air spring is applied to the suspension of the vehicle, the natural frequency of the body can remain basically unchanged even if the load is different.
The bag air spring is composed of rubber air bag with curtain line and compressed air closed in it, which can be divided into single section and multi-section. The steel waist ring is designed between the section and section, so that there is no radial expansion in the middle part. At the same time, in order to prevent the friction between the two adjacent sections, the upper and lower cover plate of the air bag will be closed.

When we use air springs, we need to pay attention to the following points

1. Correct installation: industrial air spring shock absorbers need to be correctly installed, which needs to be consistent with the direction of installation and the working direction of mechanical equipment or vehicles.
2. Pressure setting: industrial air spring shock absorber needs to be set according to the actual load of mechanical equipment or vehicles. Too high or too low pressure will affect the damping effect and service life.
3. Maintenance: industrial air spring shock absorber needs regular maintenance, including cleaning, lubrication, replacement of seals, etc., to ensure its normal work and service life.
4. Temperature control: the working temperature range of industrial air spring shock absorber needs to be within the specified range. Too high or too low temperature will affect its damping effect and service life.
5. Safety inspection: industrial air spring shock absorbers need regular safety inspection, check whether there is damage or wear, if necessary, timely replacement or maintenance.

Industrial air springs photos

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.