Hematology Analyzer Reagents Abbott Analyzer CD-3000 Medical Equipment Analyzer Reagents

Hematology Analyzer Reagents Abbott Analyzer CD-3000 Medical Equipment Analyzer Reagents

Intended Use

To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on ABBOTT CD3000,3500,3700 hematology analyzers. This product is for In Vitro Diagnostic Use only.

APPLICABLE INSTUMENT

For use with CD3000,3500,3700 hematology analyzers.

• Re-calibration is recommended when changing the origin of the reagents.
• It is not recommended using different brands of solutions together on one unit of analyzer.
• Do not ingest. Avoid contact with skin and eyes.
• Skin contact: Flush with plenty of water.
• Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
• This kit is for professionals and in vitro diagnostic use only.
• Never put distilled water on the analyser (except clean for shipping menu), otherwise the pneumatic unit can be damaged seriously.

Specification

L-99231-01	Diluent CD5	20L
L-99311-01	Sheath CDS	10L
L-99321-01	Detergent CD5	20L
33-40-E001	EZ-Cleaner	50ml×2

KIT COMPOSITION

Diluent CD5	NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1.0%
Detergent CD5	Sodium Sulfate<1.5%, Sodium Chloride<0.6%
Sheath CDS	Sodium Phosphate, Diabasic<0.3%
EZ-Cleaner	Subtilisin<5.0%

PROCEDURES

• Using the function keys press the following menus:

MAIN-SPECIAL PROTOCOLS-REAGENT RESERVOIRE-EMTY DILUENT

• Remove the reagent inlet tube from the Diluent.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
• Put the reagent tubes into the boxes and/or bottles of Labnovation reagents.
• Using the function keys press the following menu:

FILL DILUENT

This step will fill the reagent system with Labnovation reagent.

• Repeat steps 1-5 with Lyse and Sheath.
• Run at least 5 backgrounds. Check for the acceptable values.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary. (MAIN-CALIBRATION-ENTER-FACTOR)

Advantage

• One source for all brands of analyzer
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand

Labnovation Technologies, Inc. is an original manufacturer established in Shenzhen, China since 2001. We are dedicated in developing and manufacturing IVD instruments and reagents including HbA1c analyzer and reagents, rapid test reader & reagents, hematology reagents, clinical chemistry reagents, electrolyte reagents, wash solution and urine test reagents.
 

Labnovation products are developed in house, tested extensively in clinics and passed strict quality controls. All of our products are CE marked and approved by SFDA. In the past 15 years, our products have been exported to 110 different countries and used in 8000 hospitals worldwide. We provide both ready-to-use final products and bulk OEM reagents, including ready-to-use reagents, concentrated, and powder.

With an investment of 10% of our annual sales into R&D, we release new products every years. We win more and more domestic and international cooperation by company reputation and products quality while we actively take part in fairs like MEDICA,AACC, ARBA HEALTH and so on through which we are well-known by the companies in this field.