GE IC693CMM311 Series 90-30 Programmable Logic Controller 400 mA at 5V DC

GE IC693CMM311 Series 90-30 Programmable Logic Controller 400 mA at 5V DC

Product information GE IC693CMM311 :

The IC693CMM311 is a communications coprocessor module from the Series 90-30 PLC platform. This series of PLC particularly the IC693CMM311 is formerly manufactured by GE Fanuc however, recently acquired by Emerson Automation. This module provides CCM, Remote Terminal Unit (RTU), and SNP connectivity to any controller that hosts the module. Specifically, the IC693CMM311 is compatible for use with modular Series 90-30 CPUs. The IC693CMM311 comes with Two (2) communication interfaces such as Port 1 supporting RS232 standard and Port 2 supporting RS232 / RS422 and RS485 electrical standards. Each port is a 25-pin D-shell interface.

This module is provided with a push to restart the communication button to re-initiate communication without restarting the entire module. The IC693CMM311 ports are configurable for a variety of protocol combinations such as CCM protocol on both ports; CCM protocol on port 1, RTU protocol on port 2; RTU protocol on port 1, CCM protocol on port 2; RTU protocol on both ports; SNP and SNP-X protocols on both ports; SNP and SNP-X protocols on port 1, CCM protocol on port 2; CCM protocol on port 1, SNP and SNP-X protocols on port 2; SNP and SNP-X protocols on port 1, RTU protocol on port 2; RTU protocol on port 1, SNP and SNP-X protocols on port 2. Supported transmission speeds for CCM, SNP, and RTU are 300, 600, 1200, 240, 4800, 9600, and 19200 Baud rate. Compatible pre-assembled cable is the Wye connection cable with catalog number IC693CBL305. This module comes with MODULE OK, PORT 1 and PORT 2 tatus LED indicators for determining the module’s state of operation.

The IC693CMM311 module is part of the Series 90-30 by GE Fanuc as a CCM or Communications Coprocessor Module. It is designed to be a high-performance device. The GE Fanuc Series 90-30 IC693CMM311 communications coprocessor module is compatible with all of the modular CPUs in the GE Series 90-30 product line, but it cannot be used with any of the embedded GE Series 90-30 CPUs such as the 311, 313, or 323 embedded GE CPUs.

Any GE Fanuc Series 90-30 PLC with a modular CPU will benefit from the installation of the GE IC693CMM311 communications coprocessor module and all of its features and functions. The protocols that this communications coprocessor module can support are the SNP protocol, the Modbus or RTU slave communications protocol, and the GE Fanuc CCM communications protocol.

The GE Fanuc Series 90-30 IC693CMM311 communications coprocessor module has 2 built-in serial ports known as Port 1 and Port 2. The applications supported by Port 1 are RS-232 applications and the applications supported by Port 2 are RS-232 applications and RS-485 applications.

Both of the ports are wired to the IC693CMM311 communications coprocessor module’s one and only connector, which can make wiring the module difficult, but the module comes with a GE Wye cable known as the IC693CBL305 Wye cable that technicians can use to separate the 2 ports and make wiring the module easier. The module can be configured with a default setup or with configuration software. Certain CPUs (models 331 and later) can support up to 4 of these communications coprocessor modules at a time in their CPU baseplates.

More information:

IC693CMM311 's details:

Another module:

IC694MDL230	120 VAC Isolated Input (8 Points)
IC694MDL231	240 VAC Isolated Input (8 Points)
IC694MDL240	120 VAC Input (16 Points)
IC694MDL241	24 VAC/VDC Input (16 Points)
IC694MDL250	120 VAC Isolated Input (16 Points)
IC694MDL260	120 VAC Input (32 Points)**
IC694MDL632	125 VDC Input (8 Points)
IC694MDL634	24 VDC Input, Neg/Pos Logic (8 Points)
IC694MDL645	24 VDC Input, Neg/Pos Logic (16 Points)
IC694MDL646	24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points)
IC694MDL654	5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points)
IC694MDL655	24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points)
IC694MDL660	24 VDC Input (32 Points)**
IC694ACC300	Input Simulator Module (8 Points)

Our brand:

    Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices.

    Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

    The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.