Custom Design Lighter Cover Casting Aluminum Mould with Guide Design

Moulds are the ‘tool’ of the project, and it should not be underestimate the importance of good quality tools. Fabrication of the tool is often the biggest investment in the process, especially for complex shapes, due largely to the need for the pattern. Once the pattern is known however, they are easy and affordable to replicate using this very precise method.

Complex shapes usually require fabricating cast aluminum moulds, while larger shapes like industrial fluid tanks would be made from a sheet metal mould. For a polished-look to the product, the moulds themselves can be finished with a fine gloss, textured, or left unfinished depending on the application of the final product.

Unlike injection moulds, rotational moulds are much cheaper to make as they operate under less pressure. Inside the mould, the plastic is heated and rotated. As the plastic melts it forms a pool at the bottom of the mould, and begins to stick to and coat the inside as the mould is rotated. With careful design and engineering, exceptional thicknesses control can be achieved using this method.

Product Parameter

Genernal tools specifications:
1- Foam tooling model as casting patterns. Or, Block CNC machined tools available.
2- Aluminum castings with cast mounting posts. (Nominal 5/16” wall castings).
3- No or minimal porosity, guaranteed not to blow holes.
4- 2” wide x 9/16” parting lines.
5- Tongue and groove parting lines, pins design also available.
6- Tongue is on the side that will mount to arm. (So plastic powder isn’t spilled into groove)
7- Two options for texture, 0.8mm/1.5mm shoot blasted. Mat or shiny available.
8- Fabricated frame, minimum (1-1/2” x 1-1/2” mild steel tubing)
9- Spring loaded mounting system available.
10- Heavy duty Clamps designing available.
11- Mild steel lifting hooks available.
12- treatment available.
13- Required tools shrinkage according customer.

Advantages

1). The cost of plastic rotational mould is low.

2). The edge of rotational moulding products can reach more than 5mm

3). variety of inserts can be placed to rotational mould.

4). The shape of rotational moulding products can be very complex

5). Rotational moulding products can be produced fully closed.

6). Rotational moulding products can be filled with foam material, to achieve thermal insulation.

7). No need to adjust the mould, the thickness of rotational moulding products can be adjusted.

8). It's available to deal with a variety of surface patterns and produce products in various colors.

SUZHOU ZHUOHE MOULD TECHNOLOGY

specialized in custom aluminium rotatioanl moulds, located in Taicang city of Jiangsu, which is very close to Shanghai, one hour from Hongqiao Airport, two hours from Shanghai Pudong International Airport.

Mr.Guangming Huang, the founder of Zhuohe, with over 28 years experience in rotational moulds filed, he joined in 2008 Beijing Olympic drum project, 2010 Shanghai Expo Madrid project, China military case projects. Now he is leading a team with over 15 years experience in building aluminum rotational moulds, well mastered in developing cleaning machine part moulds, auto & fuel tank moulds , icebox series moulds, kayak moulds, planter moulds and so on.

Company plant covers an area of 6000 square meters, with 6 CNC machines and 3 rotomoulding machines and other related equipments. The annual tooling production capacity about 300 sets and molding plastic parts over 1200 tons. Exported to all countries in the world.

We offering one-stop service, from mould design to finished plastic parts ,as long as a sample or an approved drawing is sent to us, you can expect a sample within lead time.

Good quality, Good price, Good service.

Suzhou Zhuohe Mould Technology Co., Ltd.,

Company founded in 2015, founder Mr. Huang Guangming has many years of mould plastic products development and production experience, has led the team to participate in the 2008 Olympic Games in Beijing, World Expo, Shanghai 2010 military forces box project technology development and production. Master of engineering vehicle, rotational tank water tank water tank, clean environmental protection equipment, entertainment equipment, toys, furniture, canoeing, pontoon floating body, transport facilities, agricultural machinery accessories, cold chain insulation box, medical accessories manufacturing experience and technology.

Plant covers an area of 6000 square meters, has 8 stations of Longmen, vertical CNC, CNC lathe, EDM, wire cutting, sandblasting machine, automatic rolling machine 4 units and other related equipment. The mould can be processed with a diameter of 3.5 meters and 6 meters in diameter, with a weight of up to 1.5 tons. The annual production capacity of the mould is 300 sets and the products are 1200 tons. Mold 70% is exported to all countries in the world, including the USA, Britain, Canada, Australia, France, Germany, Russia, Mexico, Japan, Thailand, Europe and America, Southeast Asian countries and so on.

With digital mould design engineer and Aluminum Alloy most experienced domestic casting engineers, rotational molding 15 years experience, rotational foaming technology and material granulation color matching technology. We can design a reasonable solution and provide relevant drawings according to the needs of different products. To provide one-stop service, customers only need to provide samples or drawings, drawings, we can meet the agreed requirements within the delivery of your sample.

Our philosophy: stable delivery time, reasonable price and good after-sales service, excellent quality and specialized manufacturing control, are your trustworthy suppliers.