0.05mm Concrete Crack Sealer Ageing Resistance Short Maintenance Period

Low Viscosity Epoxy Concrete Crack Sealer For Surface Repairing

Concrete Crack Repairing Grout Epoxy

Crack Repair Grouting adhesive

Low Viscosity Epoxy Concrete Crack Sealer For Surface Repairing

Mainly used for concrete crack grouting,repairing,reinforcement of beam, floor, pole and basement of building, bridge and roadway. It is two components injection adhesive, mainly with modified epoxy resin and can be hardened at room temperature.

Range of Application

Repairing the hollow parts of the wall and ground of cement and mortar, ceramics and stones Crack repairing for the concrete buildings, such as prefabricated components, equipment, silos, reservoirs, dams, bridges, tunnels, pipes, concrete pavement.

Repairing and reinforcement of the concrete crack on outer and inner walls, roof, beam, pole and floor.

Features

• Effectively seal the crack and improve the durability of concrete;
• Waterproof, corrosion resistance, ageing resistance;
• Low viscosity, fluidity, can be applied to cracks smaller than 0.05mm;
• After curing has excellent toughness and impact resistance;
• Easy to handle, short maintenance period with reliable quality.

Product performance

Appearance

Part A (main): transparent liquid

Part B (hardener): brown transparent liquid

Mixing viscosity: 120-500 Pa.s

Hardened density: 1.10 +/- 0.10g/cm³

Mixing ratio (weight): 2:1

Handling time (25℃): ≥30min

Hardening time: 3 hours

Shelf time: 24 months

Product Performance

1 Main Performance

Processing Flow

Crack confirmation and marking → Crack treatment → Seal the crack and fix the injection gun base

→ mix the adhesive according to the ratio → low pressure injection → hardening and maintenance

The interval setting according to the crack width as blow:

Packaging and Logistics

1. Two components packed separately, the mixing ratio is 2:1

2. Shall be stored in cool (under 25℃), dry and ventilated place, no exceed 1 year.

3. This product is not a dangerous goods, can be shipped as normal chemical materials.

Attention

Shall be stored in cool, dry and ventilated place, avoid sun exposure and high temperature

Do not mix too much at each time, use upon actual necessary

If touched by skin, clean with acetone and washed by water immediately

Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive.

Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 hours driving from Shanghai Pudong Airport, as well as we have sales branches throughout China, we passed ISO9001-2008 certificate in 2010.

As the earliest reinforcement material providers, we have our products wide range applied to high-speed railway, nuclear power station, bridge, tunnel, subway, municipal and civil buildings, and maintain a long-term cooperative relationship with a number of well-known construction companies. As a professional manufacturer of reinforcement materials, with company spirit of "quality first, integrity management" purposes, we can provide good quality products for building and industry at home and abroad.

You are welcome to contact us, we would be delighted to be of service, providing advice and professional building reinforcement solutions.