Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging

Anti Drawing Chemical Anchor Adhesive 1000ml No Expansibility Without Sagging

1000ml 1:1 Cartrige Epoxy Chemcial Anchor Adhesive For Structural Strengthening
Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,
Chemical anchoring system used for anchoring and rebar connections in concrete.

Item #: FixingChor110
Capacity: 1000ml
Materials: Epoxy
Mixing Ratio: 3:1

Application Range

For structural work:

Rebar / steel reinforcement anchoring in new and refurbishment works.

Threaded rods

Bolts and special fastening systems

Mechanical and electrical services installation

Anchoring of supports for ducting and equipment.

Metal Work, carpentry

Fixing of handrails, balustrades and supports

Fixing of railings

Fixing of window and door frames

Fixing of the following substrates:

Concrete

Hard natural and reconstituted stone

Solid rock and masonry

Steel

Wood

Suitable for

Non-cracked concrete

Reinforcement bars

For fixing of:

Steel constructions

Approved for anchorings in

Railway or express way modification works

Structure reinforcement

Curtain wall installing

Concrete, cracked and non-cracked Applications

Rebar planting in concrete structures.

Bridge modification works

Keel fixing in out wall

ATTENTION

- Do not install anchors when the temperature is less than 10°C.

- If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly.

- At temperatures below 10°C should be warmed or stored in temperatures

of 10-30°C for 24hours prior to use to improve product flow and cure.

- If the gelling time expires, please use a new static mixer.

- Do not cut or shorten nozzles.

- It can be used again in the future by replacing the static mixer.

- Please ensure hole is properly cleaned. Hole may be damp but must be free from water.

- Do not install anchors when substrate temperature is less than 0°C.

Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive.

Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 hours driving from Shanghai Pudong Airport, as well as we have sales branches throughout China, we passed ISO9001-2008 certificate in 2010.

As the earliest reinforcement material providers, we have our products wide range applied to high-speed railway, nuclear power station, bridge, tunnel, subway, municipal and civil buildings, and maintain a long-term cooperative relationship with a number of well-known construction companies. As a professional manufacturer of reinforcement materials, with company spirit of "quality first, integrity management" purposes, we can provide good quality products for building and industry at home and abroad.

You are welcome to contact us, we would be delighted to be of service, providing advice and professional building reinforcement solutions.