High Speed Industrial Fibre Cement Production Line For Fiber Cement Wall Board

Low Price Fiber Cement Board Corrugated Panels Sheet Production Line

Technical requirements of fiber cement board panels sheet production line

1.1 Product specification: L x W x T: 3000 x 920 x 6mm.

Special sizes can be custom-made specially.

The common size: wave height is 40mm and wave pitch is 150mm or wave height is 51mm, and wave pitch is 177mm.

1.2 Quality Standard of Corrugated Fiber Cement Sheets Making Line

1.3 Others of Corrugated Fiber Cement Sheets Making Line :

(1) Theoretical capacity: 9000m2/day

(2) Pre-curing time: 12h

(3) Daily productive time: 20h

(4) Reserve of main raw material:

Dosage of fiber material should be supported for 7days.

Dosage of powdery material such as cement, quartz powder should be supported for 3days.

1.4 Basic requirement for quality of raw materials:

Limestone: SiO2≥80%, Fineness: ≥ 200 pore, sieve <10%

Cement: ordinary Portland cement with grade of above 32.5.

Fiberglass: fineness is 0.088mm, length is 15-30mm.

Fiber: asbestos or wood pulp or construction PP fiber.

Pulp: unbleached sulfate needle wood pulp or kraft pulp, pulping degree is 20 ~70°SR

Above mentioned contents are basic requirements for raw material. In some case, different raw materials also can produce qualitied products, we will confirm according to the raw materials after being analyzed.

Raw materials

The common proportion of material for fiber cement tile as follows:

Cement 50%, limestone powder 30%-40%, asbestos fiber 6%-8%, pulp fiber 4%-5%, and fiberglass 1%

If no asbestos tile, the proportion of materials as follows:

Cement 50%, limestone powder 30%-40%, wood pulp 8%, pulp fiber 8%, and fiberglass 1%

Sinoma (Yichang) Energy Conservation New Material Co., Ltd., a member unit of China National Building Material Group Co., Ltd. and a Holding Co., Ltd. subordinate to Sinoma Energy Conservation Ltd. (stock code: 603126), is a large enterprise specialized in research and development, production and sales of high-end calcium silicate board/fiber cement substrate, multifunction and multispecies painting plate, integrated composite external wall insulation and decoration board and light composite external wall insulation board.

Located in Guandaohe Village, Yuquan Office, Dangyang City, Hubei, the Company covers an area of 143600m², and has building area of standard industrial factory building of 86000m². By virtue of process technology and management experience of Wuhan Building Material Industry Design & Research Institute Co, Ltd. having proprietary intellectual property rights, the Company introduces the international leading full-automatic production process and equipment, and has annual output of high-end calcium silicate board/fiber cement substrate for 20000000m², multifunction and multispecies painting plate for 1000000m², integrated composite external wall insulation and decoration board for 1000000m² and light composite external wall insulation board for 2000000m².

　　Sinoma high-end calcium silicate board/fiber cement substrate is energy-saving and environmentally friendly, has strong shock resistance and impact resistance, and is asbestos-free completely, and characterized with fire prevention and inflaming retarding, heat insulation, corrosion prevention and moth proofing, water resistance and moisture protection, light weight and high strength, and good weather resistance. Therefore, it can be widely used in the internal and external walls insulation and decoration, ceiling, floor, advertising board, bulkhead, furniture clapboard, wall material lining plate, fire-proof plate, hollow floor, security door lining plate and multifunction painting plate substrate.