Indoor Metallic Powder Coat , Electrostatic Spray Epoxy Polyester Powder Coating Paint

Indoor Metallic Powder Coat , Electrostatic Spray Epoxy Polyester Powder Coating Paint

Introduction:

This product adopts linear phenolic epoxy resin, polyurethane modified epoxy resin and curing agent. This product has high reactivity, strong adhesive force, high crosslinking density, the coating has excellent chemical resistance, solvent resistance, cathodic disbonding resistance, excellent flexibility, impact resistance, high temperature resistant performance, etc.

Feature:

1. Very good adhesion with the substrate.
2. Extremely strong ability of corrosion
3. Good leveling, high gloss coating surface, high compactness
4. The coating has excellent high temperature cathodic disbonding resistance.
5. Strong flexibility, can be 4/5 after flattening and pressing
6. Good high and low temperature resistant performance.
7. Strong film boiling resistance.

Power Specification

Coating specification

Carried Standard: GB/T 5135.20-2010; CJ/T 120-2008

Application Area: Fire water supply pipeline anticorrosion coating inside and outside.

Applicable process: spray coating and dip coating

Notes:

1. Steel surface should be no oil and water, surface quality should reach Sa2 1/2 level (GB/T8923), anchor pattern depth 50-90mm, clean dust and abrasive attached to the steel surface, preheat, control temperature in 180－230℃.
2. Product should be stored in ventilated, dry, indoor temperature below 30 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.
3. To best curing epoxy coating, best anti-corrosion, suggested preheating tube surface temperature in more than 200℃, in order to better improve the curing completion.

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.