Durable Q235 Conoid Galvanized Steel Transmission Poles For Electricity Distribution

Material Test:

1. All of our material are purchased from famous mill factory to assure the quality

2. A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material

in our factory; otherwise we have our reason to refuse the material.

3. Before put into production, all the material must pass the chemical and physical analysis to make sure that they

have met the requested strength and component.

Inspection:
Before shipment, we have a final inspector manager to check the products on every detail and component to

make sure it all meet the drawing.



Package and shipment:
Our poles as normal cover by Mat or straw bale at the top and bottom and wood between the poles to avoide the damage on the galvanization of the pole ,anyway also can following by client required , The loading capacity of 40HC or OT an be calulated calculation base on the client actually specification and data.



Company Introduction:
Jiangsu Milky Way Steel Poles Co.,Ltd .was founded in 1991 is a cooperative shares system corp. The company

covers an area of 150,000 square meter .It is now centralizing in pole design, ,research, production ,and

installation. After twenty years of development , the company owns Hot Spray Coating Zinc Branch Factory ,Anhui

Steel Branch ,MilkyWay Lighting Installation Engineering Company. The total asset of the
company amount to 100 million RMB and the annual production of transmission pole comes to 20 thousand ton

per year . The annual production of steel structure comes to 10 ton and street pole of 30 thousand sets .