Super Duplex Stainless Steel Pipe 2205 2507 UNS S32205 S331803 S332750 S32760

Super Duplex Stainless Steel Pipe 2205 2507 UNS S32205 S331803 S332750 S32760

Proudct information

The duplex stainless steels have a microstructure, when heat treated properly, of nearly equal proportions of austenite and ferrite. This microstructure ensures that the duplexes are much more resistant to stress corrosion cracking (SCC) than austenitic stainless steels. The specification 0.2% Proof Stress of the duplexes is more than double that of austenitic stainless steels such as the 304 types andu316L types. This often allows down gauging in the design, depending on Young’s Modulus and buckling limitations.

The microstructures inside duplex stainless steels are approximately 50 per cent austenite and 50 per cent ferrite, and consequently duplex products share the physical properties of both ferritic and austenitic grades. Duplex stainless steels are resistant to the cracking caused by chloride stress corrosion in austenitic grades, and have improved resistance to localised corrosion. This family of stainless steels has roughly twice the yield strength of their counterpart austenitic grades which means we can use it to design thinner gauge tubing. Higher hardness values provide better wear resistance for high precision tubes.
Duplex steels are easily welded and formed, similar to austenitic grades. Depending on chromium, nickel and molybdenum content, duplex stainless steels are divided into four main categories: lean duplex, duplex, super duplex and hyper duplex. This family of alloys has great advantages in both material and engineered fabrication costs.

Typical applications for this alloy group include heat exchanger tubes, umbilicals, structural tanks, pulp and paper making equipment, pipes and fittings, and seawater handling systems.

Chemical Composition :

The chemical composition of stainless steel grade Super Duplex 2205 is outlined in the following table.

Phusical Properties:

The physical properties of stainless steel grade Super Duplex 2205 are tabulated below:

Applications:

Super Duplex 2205 is widely used in the following sectors:

Power,Marine,Chemical,Pulp and paper,Petrochemical,Water desalinization,Oil and gas production

Products made using Super Duplex 2205 include:

Fans,Wire,Fittings,Cargo tanks,Water heaters,Storage vessels,Hydraulic piping,Heat exchangers

Hot water tanks,Spiral wound gaskets,Lifting and pulley equipment,Propellers, rotors, and shafts.

Factory information

Hunan Green & Innovative Materials Co., LTD., located in Gaoxi Industrial park ,louxing district ,Loudi ,Hunan Province .The main products are stainless steel straight seam welded steel pipe, corrugated pipe and efficient pitted surface pipe.

TOBO GROUP sales head offce in Shanghai.

We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicians.

We have five branch factories which can supply the best quality pipes, tubes, fittings flanges and related accessories. Now, it owns a number of advanced pipe production equipments, metal, forging, machining, cold forming, hot extrusion, such as heat treatment process, producing 60, 000 tons of pipe fittings. Company with a variety of detection devices, such as nondestructive testing, chemical analysis, metallographic examination, physical experiments. The technical is very strength, our main products contain fittingsforged socket welding fittings and threaded fittings, pipe weld and the materials of the products contain stainless steel ,duplex-stainless steel alloy steel.

In addition, we are authorized by more than 120 top-class mills from South Korea,Japan and China like JFE,SUMITOMO,POSCO,BAOSTEEL, TISCO,LISCO,.TPCO,HENGYANG VALIN and so on .

Our main products as follows:

• Stainless steel pipe & tube

(seamless pipe / welded pipe / square pipe / rectangular tube,duplex stainless / inconel tube)

• Carbon / alloy steel pipe & tube

(seamless pipe / ERW / SSAW / LSAW / UOE / hollow section pipe / Galvanized Pipe)

• Tubing and casting

(line pipe,water pipeline,gas pipeline,oil pipeline)

• Special steel tube

(copper tube/titanium tube/aluminium tube/nickel alloy )

• steel bar

(round bar/angle steel /flat steel/channel steel/steel wire)

• Pipe Fittings

(eblows, equal / reducing tees, concentric/eccentric reducers, caps, crosses, bends, dish end/end cup, stub ends, unions, couplings / hex couplings, swage nipples , nipples, hex. plug, sockolet, weldolet, thredolet, etc)

• Flange

(DIN flange/ AISI flange/blind flange/welding flange/stainless flange/slip on flange)

• steel sheet / coil

(stainless steel/carbon steel/alloy steel/galvanized steel/aluminium )

• Valve

(ball valve/gate valve/butterfly valve/globe valve/swing check valve/ check valve)

In order to comply with the global modernization services development trends and eliminating the varieties distress of the global enterprise‘s purchase in the consumables.. We coordinate the pressure pipe manufacturer which with the scale of production,quality control and high cost performance (has passed ISO 9001 quality series attestation, ccs, DNV,PED/97/23/EC,AD2000-WO,special equipment manufacturing license,ASME-SA182.through a variety of effective assort mechanism to make up the shortage of supply and Post-processing of VAT enterprise, and to supply high quality pipe fittings, because of the superior quality and good service, we have established long term business cooperation with more than 60 countries and areas,which covers Europe, Africa, South America, North America, Middle East, Taiwan and South East Asia and so on.

With many years effort and support from our valuable customers, these products have obtained a big market share in the world.

Our business principle is "Superior quality, Competitive price, Timely delivery and Considerate service " Standing to the principle of “Enterprises focus on the core business”, TOBO will actively promotes the globalization of business strategy approach, using advanced supply chain management technology to service for clients with higher quality and more competitiveness ‘ s products. At the same time, we sincerely reply your inquiry, honesty waiting for your visiting and wish to have cooperation with you at the any time. We welcome all the customers to contact us for more information. We assure you, with our technical knowledge and experience, our company will be one of your Stable, Continuate business parters in China.

info@tobo-group.com