Automotive Battery Electrical Testing Equipment , SUS304 Thermal Shock Chamber

Automotive Battery Electrical Testing Equipment Thermal Shock Chamber

Thermal shock test chamber is also known as hot and cold impact testing machine, used to testchemical changes or physical damage caused by thermal expansion and contraction of materials in theshortest time. It is divided into two-zone type and three-zone type, the difference is the test method and internal structure.

Specifications:

thermal shock test chamber
	GS-547	GS-548	GS-549	GS-550	GS-551
Workroom Dimensions(cm)	50*50*60	60*60*70	60*70*70	80*80*80	100*100*100
Temperature Range	A:-20℃-150℃ B:-40℃-150℃ C:-60℃-150℃ D:-80℃-150℃
Fluctuation / Evenness	±0.5℃/±2℃
Conversion time	15s
Recovery time	5 min
Time needed for heating	RT℃~200℃≤30min
Time needed for cooling	RT℃~-45℃≤30min
low temp.zone temp range	-45℃~ -10℃
High temperature control	RT+10℃~-200℃
The machine noise	≤72dB(A)
Load on the largest	≤20 kg
Equipment installed power	~3.25KW	~3.55KW	~3.95KW	~5.5KW	~38.5KW
Material	The studio:# SUS304 stainless steel The outer wall: Cold plate coating/ #SUS304		The outer wall: Cold plate coating/#SUS304
Wind Cycling Way	Centrifugal fan-broadband type forced air ciruculation
Refrigeration Way	Single stage compression refrigeration
Refrigerater	French Tecumseh
Refrigerats	R404A USA Dupont environment protection refrigerant
Condesing Way	Air-cooled or water-cooled
Heater	Nickel Chorme Heating Wire Heater
Humidifier	Semi-closed steam and wet
Water Supplying way	Automatic cycling water supply
Control Instrument	OYO-8256p or HLS980
Safety device	Non-fuse-switch(compressor overload, refrigerant hihg low voltage, over-humidiy and temperature protection, Protection switch, fuse stoppage warning system)

FAQ:

Q1: Are you manufacturer?

A: Yes, we are manufacturer with more than 10 years' experience.

Q2: What are your Price Terms?

A : Price can be based on FOB, CFR, or CIF, etc.

Q3: What are your Payment Terms?

A: Payment shall be made by T/T, L/C, or D/P, etc., it varies considerably according to the region that you are in.

Q4: What's your Minimum Order Quantity?

A: Any order quantity is warmly welcomed.

Q5: Do you have English Manual for each machinery?

A: Yes. The instruction manual,the test report and other Data Sheets related shall be provided by us.

Q6: Can I print my Logo on the machine? A: Yes, sure.

Q7: Can you customize the machine for me ?

A: Yes, we can customize according to customer's requirements.

Q8: What shall we do if breakdown occurs?

A: Please informed us once the breakdown occurs. During warranty period, if breakdown occurs, we shall respond in time after receiving the

notification of the buyer. We shall handle failure over the telephone/ fax or arrange relevant personnel to the site according to the buyer’s

requirements.

Q9: What are your modes of transportation?

A: Courier service, Air transport, Sea Transport.

Q10: Which ports do you usually ship at?

A: We can load container at: Qingdao, Shanghai, Ningbo, Tianjin, Guangzhou etc.

Q11: Do you support overseas installtion and debugging?

A: Yes, normally We will despatch a profesional team with translater to the field to complete the whole project.

Q12: If any breakdown, do you have any prompt ways to support us?

A: Yes, we have on-line services to make one-one explanation.

Company Profile

The company had grown very fast since it was founded in 2009 which holds the operation concepts of being morality-rooted and honesty-based, FREETO® has earned great reputation globally with our excellent service and quality. Guided by the FREETO® mission, “Perfect Quality, Sincere Service, Standardized Management and Promoting Innovation”, we aim to be the top medical device company. We hope to utilize the biological engineering technology and medical research to serve for the health of all humanity.