Kaideli Industrial Dual Discharge Freezer Coolroom Evaporator Unit Coolers

ED SERIES INDUSTRIAL DUAL-DISCHARGE UNIT COOLERS

1. Product description:

ED series industrial air cooler adopts the structure of air inlet from the bottom and air outlet from the two sides. It is mainly used for those cold storage with small height size of storage or production cold room that is not suitable for direct blowing.

This series of products have the following characteristics:

● Casing: high quality galvanized steel with silver powder coating (RAL7001) , it has strong anti-corrosion property; The outer water plate adopt hinge structure, convenient and quick operation.

● Evaporator end plate adopts aluminum plate, effectively protect copper tube, reduce weight.

● Double water plate design: the outer water plate adopts angular structure, smooth drainage, no drainage dead angle; The inner water tray adopts the flume structure of aluminum plate. The condensed water or defrosted water is directly discharged into the outlet of the outer water tray through the inner water tray.

● Coil:copper pipe φ15, tube spacing 50×50 square arrangement, heat transfer area is large, heat transfer temperature difference is small, fin frosting speed is slow.

● Corrugated aluminum fins with hydrophilic film, fin spacing of 4.0 and 6.0mm and 9.0mm to meet the different temperature requirements of cold storage.

● Fan: high-power external rotor fan of blower, operating temperature -30℃~60℃; Fan specifications φ450,φ500, the formation of different specifications of the product series, users have more choices.

● Defrosting:standard electric heating defrosting, stainless steel heating pipe are distributed on the coil tube fin and inner water plate, has a good defrosting effect. You can also choose hot gas defrost according to customer requirements.

● IP65 grade waterproof junction box and waterproof connector, the fan and heating pipe adopt independent wire box ,with better waterproof effect, high reliability.

● The outlet of the air cooler is equipped with schrader alve, which is convenient for users to detect pressure.

● Strict factory pressure test, test pressure 23bar.

● Expansion valve can be pre-installed according to customer requirements.

● It can meet refrigerant for R404A,R507A,R448A,R449A,R134a,R22 etc.

2. Standard configuration and options:

●:Standard；○:Options；×:Do not choose.

3. Technical data sheet:

3.1 Fin Spacing 4.0mm

3.2 Fin spacing 6.0mm

3.3 Fin spacing 9.0mm

1. In the table ,Tc is cold room temperature, ΔΤ is difference between cold room temp. and evaporation temp.

2. The airthrow is 0.5m/s air arrived distance at ambient temperature.

3. For cooling capacity of other working conditions, please refer to the correction coefficient.

4. Electrical parameter table:

5.How to select correct evaparator:

Generally,Choose evaporator capacity=cold room cooling capacity *1.15

1.When the cold room temperature is around 0℃, select 4.5mm as fin space.

Evaporator choose=1.0*Q0

2.When the cold room temperature is around -18℃, select 6mm as fin space.

Evaparator choose=1.1*Q0

3.When the cold room temperature is around -25℃, select 9mm as fin space.

Evaparator choose=1.27*Q0

Remarks: The water defrost and hot gas defrost type are also optional.

Customized specification leave me message for details.

6.Want to know other related products?-click picture for detailed specification

7.How to assure quality? Any procedure?

Our QC department will make sure of each step

8.Do you factory?
We are factory established in 1995 and through 24years developed,welcomed by all our customers.Because of all your support now we are a big family of more than 300 people,covered 50000 square meters,and your supporting is very important of continuing our dream of eating fresh and healthy food.

9.Do you attend exhibition?

Each year we will attend domestic national and foreign exhibition,also we will support our agent to attend exhibition,welcome to join us.

10.Why choose us

Professional:23 years focus one thing-refrigeration equipments

Material we use sufficient

Certificate:CE, ISO, and cetiifcate of producing special pressure equipment

11.Projects reference?

12.FAQ

1, Q:Where is your factory address?

A:We are factory and located in refrigeration equipment producing base Shengzhou,Zhejiang province.

2, Q: What is your package?

A: Our package comply to custom require not include original wood.

3, Q:What is your MOQ?

A: Ordinary products can order from 1 set.

4, Q: Can you offer sample?

A: Yes,we can offer sample.and cost and delivery at your charge.

5, Q:I can't find products on your list?

A: Please contact me directly.

6,Q:How can i confirm your factory?

A: We have third party verified document of Bureau Veritas report,you can download in company page or leave me message to get.