CSK10 Freewheel Bearing Replacement CSK10P CSK10PP One Way Overrunning Clutch

CSK10 CSK10P CSK10PP One Way Bearing Overrunning Clutch

AVAILABLE TYPE

CSK / CSK-2RS / CSK...P / CSK...PP / CSK...P-2RS / CSK...PP-2RS

Bore Range: 8-40mm

The CSK Series is a sprag type clutch integrated into a 62 Series ball bearing (except sizes 8 and 40).

CSK..2RS

CSK . .2RS clutches are .197” (5mm) wider than a standard 62 Series bearing, as they are equipped with lip seals for washdown applications .

CSK..P

CSK . .P has the same construction and outside dimensions as type CSK, but has a keyway on the inner race .

These clutches can be mounted on a shaft with recommended k6 tolerance and the outer race must be pressed into a rigid housing with a recommended N6 tolerance . The resulting housing and shaft diameters must be checked to ensure that the bearing has adequate radial clearances .

CSK..PP

CSK . .PP features a keyway on both the inner and outer race . The recommended mounting tolerances are k6 on the shaft and K6 in the rigid housing . A h6 tolerance on the shaft or H6 in the housing are also acceptable for a light press fit assembly . Always check to ensure that the bearing has adequate radial clearances.