SGS 4 Legs Q235B 500KV Electrical Transmission Tower

Self Supporting Steel Lattice Tower for Overhead Transmision Lines

1. Production decription

A lattice tower or truss tower is a freestanding vertical framework tower. This construction is widely used in transmission towers carrying high voltage electric power lines. Its advantage is good shear strength at a much lower weight than a tower of solid construction would have as well as lower wind resistance. In structural engineering the term lattice tower is used for a freestanding structure, while a lattice mast is a guyed mast supported by guy lines.

A lattice transmission tower is a key part of a power transmission system. A lattice transmission tower consists of the following parts:

1. The peak of the transmission tower
2. The cross arm of the transmission tower
3. The boom of transmission tower
4. Cage of transmission tower
5. Transmission Tower Body
6. Leg of transmission tower
7. Stub/Anchor Bolt and Baseplate assembly of the transmission tower.

Certificate:

Type test

2. Product capacity

We have 6 production line for angle steel manufacturing ,we can supply 3000 tons angle steel tower per month .

​

​3. Technical support

Our engineer and drawer has lots of designing ,lofting experience of lattice steel towers .

Which we can supply a overall solution of all the towers .

4. Quality control

We have very strict quality control in every steel towers .

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

We usually has two ways of trial assembly for lattice steel towers : trial assembly before galvanzation

and after galvanization.

6. Hot dip galvanization and painting

7. Company introduction

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission steel towers (the voltage up to 1000kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 40,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

8. Product catalogue:

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers ‘requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• - Environmental Management System Certificate: ISO14001:2015
• - Quality Management Systems Certificate: ISO9001:2015
• - Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

Welcome to contact us ,we make sure your every question will be answered in time .