Product Details
Company Profile

Full Complement Needle Roller Bearing Drawn Cup Open End B-88

Drawn Cup Needle Roller Bearing Full Complement Bearing Open End B-88

When a rolling bearing is needed for a compact and economical design, where it is not pratical to harden and grind the housing bore, or where the housing materials are of low rigidity such as cast iron, aluminum or even plastics - drawn cup needle roller bearings should be considered.

Reference Standards:

ANSI/ABMA 18.2 - needle roller bearings - radial, inch design.
ASTM F2162 - standard specification for bearing, roller, needle: drawn outer ring, full complement, without inner ring, open and closed end, standard type.

Overview:

Needle roller and cage assemblies consist of a complement of needle rollers held in place by a cage
With no inner or outer ring, the low cross section provides maximum load-carrying capability within the smallest envelope
The mating shaft and housing are normally used as inner and outer raceways
Unsealed closure
B Series: Standard Series full complement of mechanically-retained needle rollers
BH Series: Heavy Series full complement of mechanically-retained needle rollers
-OH designates with oil hole for lubrication

Drawn Cup Needle Roller Bearing Full Complement Bearing Specifications:

Shaft Dia.	Bearing Designation		Boundary Dimensions			X (max.)	Basic Load Rating		Limiting Speed	Mass
Shaft Dia.	Open End	Closed End	Fw	D	C		Cr	Cor	Oil	open End	Closed End
mm			mm				N		rpm	kg
1/8	B-24	—	3.175	6.350	6.35	—	1730	1650	13000	0.001	—
5/32	B-2 1/2 4	—	3.970	7.142	6.35	—	2000	2000	11000	0.001	—
	B-2 1/2 5	—	3.970	7.142	7.92	—	2580	2800	11000	0.001	—
3/16	B-34	M-341	4.763	8.733	6.35	1.78	2220	2140	11000	0.001	0.002
	B-36	M-361	4.763	8.733	9.53	1.78	3780	4230	11000	0.002	0.003
6.350	B-44	M-441	6.350	11.113	6.35	2.03	2760	2620	10000	0.002	0.003
	B-45	M-451	6.350	11.113	7.92	2.03	3560	3690	10000	0.003	0.004
	B-46	—	6.350	11.113	9.53	—	4540	5030	10000	0.004	—
	B-47	M-471	6.350	11.113	11.13	2.03	5520	6450	10000	0.004	0.005
7.938	B-55	M-551	7.938	12.700	7.92	2.03	4090	4580	8300	0.004	0.004
	B-56	—	7.938	12.700	9.53	—	5250	6320	8300	0.005	—
	B-57	M-571	7.938	12.700	11.13	2.03	6320	8100	8300	0.005	0.006
	B-59	—	7.938	12.700	14.27	—	8360	11600	8300	0.006	—
	BH-57	MH-571	7.938	14.288	11.13	2.29	7030	7340	12000	0.007	0.008
	BH-59	—	7.938	14.288	14.27	—	9470	10800	12000	0.009	—
9.525	B-65	M-651	9.525	14.288	7.92	2.03	4540	5520	7100	0.004	0.005
	B-66	M-661	9.525	14.288	9.53	2.03	5830	7610	7100	0.005	0.005
	B-67	—	9.525	14.288	11.13	—	7070	9700	7100	0.006	—
	B-68	M-681	9.525	14.288	12.70	2.03	8180	11800	7100	0.007	0.008
	B-69	—	9.525	14.288	14.27	—	9340	13900	7100	0.007	—
	B-610	M-6101	9.525	14.288	15.88	2.03	10400	16000	7100	0.008	0.010
	BH-68	—	9.525	15.875	12.70	—	9340	10900	10000	0.010	—
11.113	B-76	—	11.113	15.875	9.53	—	6360	8900	6300	0.005	—
	B-77	—	11.113	15.875	11.13	—	7700	11300	6300	0.007	—
	B-78	M-781	11.113	15.875	12.70	2.03	8990	13800	6300	0.008	0.009
	B-710	—	11.113	15.875	15.88	—	11300	18700	6300	0.010	—
	BH-78	—	11.113	17.463	12.70	—	10300	12800	8800	0.010	—
12.700	B-85	M-851	12.700	17.463	7.92	2.03	5340	7380	5600	0.005	0.006
	B-86	M-861	12.700	17.463	9.53	2.03	6850	10100	5600	0.006	0.007
	B-87	M-871	12.700	17.463	11.13	2.03	8320	13000	5600	0.007	0.008
	B-88	M-881	12.700	17.463	12.70	2.03	9610	15700	5600	0.009	0.010
	B-810	M-8101	12.700	17.463	15.88	2.03	12200	21300	5600	0.010	0.012
	B-812	M-8121	12.700	17.463	19.05	2.03	14700	27000	5600	0.013	0.014
	BH-87	—	12.700	19.050	11.13	—	9470	11800	7900	0.010	—
	BH-88	—	12.700	19.050	12.70	—	11200	14600	7900	0.012	—
	BH-810	—	12.700	19.050	15.88	—	14400	20200	7900	0.015	—
	BH-812	MH-8121	12.700	19.050	19.05	2.29	17400	25800	7900	0.018	0.020
12.288	B-95	M-951	14.288	19.050	7.92	2.03	5740	8320	5000	0.006	0.006
	B-96	M-961	14.288	19.050	9.53	2.03	7340	11400	5000	0.007	0.008
14.288	B-97	M-971	14.288	19.050	11.13	2.03	8850	14600	5000	0.008	0.010
	B-98	M-981	14.288	19.050	12.70	2.03	10300	17700	5000	0.009	0.010
	B-910	M-9101	14.288	19.050	15.88	2.03	13100	24000	5000	0.012	0.013
	B-912	M-9121	14.288	19.050	19.05	2.03	15700	30300	5000	0.014	0.015
	BH-98	—	14.288	20.638	12.70	—	12000	16500	7100	0.013	—
	BH-910	—	14.288	20.638	15.88	—	15400	22700	7100	0.016	—
	BH-912	—	14.288	20.638	19.05	—	18600	29000	7100	0.020	—
15.875	B-105	M-1051	15.875	20.638	7.92	2.03	6100	9250	4500	0.006	0.007
	B-107	M-1071	15.875	20.638	11.13	2.03	9390	16200	4500	0.009	0.010
	B-108	M-1081	15.875	20.638	12.70	19.70	10900	19700	4500	0.010	0.012
	B-1010	M-10101	15.875	20.638	15.88	2.03	13800	26700	4500	0.013	0.015
	B-1012	M-10121	15.875	20.638	19.05	2.03	16600	33700	4500	0.015	0.017
	BH-108	MH-1081	15.875	22.212	12.70	2.03	12700	18300	6500	0.014	0.016
	BH-1010	—	15.875	22.212	15.88	—	16400	25300	6500	0.018	—
	BH-1012	—	15.875	22.212	19.05	—	19800	32300	6500	0.021	—
	BH-1016	—	15.875	22.212	25.40	—	26200	46300	6500	0.028	—
17.463	B-116	M-1161	17.463	22.212	9.53	2.03	8180	14000	4200	0.008	0.009
	B-118	M-1181	17.463	22.212	12.70	2.03	11500	21700	4200	0.011	0.012
	B-1110	M-11101	17.463	22.212	15.88	2.03	14600	29400	4200	0.014	0.015
	B-1112	M-11121	17.463	22.212	19.05	2.03	17400	37100	4200	0.016	0.019
	BH-117	—	17.463	23.813	11.13	—	11400	16200	6000	0.014	—
	BH-1110	MH-11101	17.463	23.813	15.88	2.29	17300	27800	6000	0.019	0.021
	BH-1112	—	17.463	23.813	19.05	—	20900	35500	6000	0.023	—
19.050	B-126	M-1261	19.050	25.400	9.53	2.29	9700	13600	5600	0.012	0.014
	B-128	M-1281	19.050	25.400	12.70	2.29	14100	22000	5600	0.016	0.019
	B-1210	M-12101	19.050	25.400	15.88	2.29	18200	30300	5600	0.020	0.024
	B-1212	M-12121	19.050	25.400	19.05	2.29	21900	38700	5600	0.024	0.028
20.638	B-136	—	20.638	26.988	9.53	—	10100	14700	5200	0.013	—
	B-138	M-1381	20.638	26.988	12.70	2.29	14800	23800	5200	0.018	0.020
	B-1314	M-13141	20.638	26.988	22.23	2.29	26700	51200	5200	0.031	0.035
	B-1316	M-13161	20.638	26.988	25.40	2.29	30300	30300	5200	0.035	0.040
	B-1320	—	20.638	26.988	31.75	—	37300	78300	5200	0.044	—
	BH-138	MH-1381	20.643	28.575	12.70	2.79	14900	20800	6300	0.023	0.026
	BH-1310	MH-13101	20.638	28.575	15.88	2.79	19700	29900	6300	0.029	0.032
	BH-1312	MH-13121	20.638	28.575	19.05	2.79	24200	39000	6300	0.034	0.039
22.225	B-146	M-1461	22.225	28.575	9.53	2.29	10500	15800	4800	0.014	0.016
	B-148	M-1481	22.225	28.575	12.70	2.29	15400	25600	4800	0.019	0.022
	B-1412	M-14121	22.225	28.575	19.05	2.29	23900	45400	4800	0.028	0.032
	B-1416	M-14161	22.225	28.575	25.40	2.29	31600	64900	4800	0.038	0.043
22.225	B-1418	—	22.225	28.575	28.58	—	35200	74700	4800	0.043	—
	BH-1410	MH-14101	22.225	30.163	15.88	2.79	20300	32200	5880	0.03	0.035
	BH-1412	MH-14121	22.225	30.163	19.05	2.79	25000	42000	5880	0.036	0.041
	BH-1416	—	22.225	30.163	25.40	—	33700	61400	5880	0.049	—
23.813	B-158	—	23.813	30.163	12.70	—	15900	27500	4500	0.020	—
	B-1516	M-15161	23.813	30.163	25.40	2.29	32800	69400	4500	0.040	0.045
25.400	B-166	—	25.400	31.750	9.53	—	11300	18100	4300	0.016	—
	B-167	M-1671	25.400	31.750	11.13	2.29	14000	23700	4300	0.019	0.021
	B-168	M-1681	25.400	31.750	12.70	2.29	16500	29300	4300	0.021	0.024
	B-1610	M-16101	25.400	31.750	15.88	2.29	21200	40500	4300	0.026	0.030
	B-1612	M-16121	25.400	31.750	19.05	2.29	25700	51600	4300	0.032	0.036
	B-1616	M-16161	25.400	31.750	25.40	2.29	33900	74300	4300	0.043	0.048
	BH-168	MH-1681	25.400	33.338	12.70	2.79	16600	25600	5200	0.027	0.031
	BH-1610	—	25.400	33.338	15.88	—	22000	36800	5200	0.034	—
	BH-1612	MH-16121	25.400	33.338	19.05	2.79	27100	48000	5200	0.041	0.046
	BH-1614	—	25.400	33.338	22.23	—	31900	59200	5200	0.048	—
	BH-1616	MH-16161	25.400	33.338	25.40	2.79	36500	70300	5200	0.054	0.062
	BH-1620	—	25.400	33.338	31.75	—	45400	93000	5200	0.068	—
	BH-1624	MH-16241	25.400	33.338	38.10	2.79	53400	115200	5200	0.082	0.093
26.988	B-1710	M-17101	26.988	33.338	15.88	2.29	21900	43100	4000	0.028	0.032
	BH-1712	—	26.988	34.925	19.05	—	29500	52500	5200	0.035	—
28.575	B-186	M-1861	28.575	34.925	9.53	2.29	12100	20400	3800	0.018	0.020
	B-188	M-1881	28.575	34.925	12.70	2.29	17600	33000	3800	0.024	0.027
	B-1810	—	28.575	34.925	15.88	—	22600	45800	3800	0.029	—
	B-1812	M-18121	28.575	34.925	19.05	2.29	27300	58300	3800	0.035	0.04
	B-1816	M-18161	28.575	34.925	25.40	2.29	36200	83600	3800	0.047	0.054
	BH-1812	MH-18121	28.575	38.100	19.05	3.05	31500	52900	5600	0.056	0.063
	BH-1816	MH-18161	28.575	38.100	25.40	3.05	42500	77800	5600	0.074	0.084
	BH-1820	MH-18201	28.575	38.100	31.75	3.05	52900	103200	5600	0.093	0.105
	B-1910	M-19101	30.163	38.100	15.88	2.79	24100	43800	4400	0.040	0.045
30.163	B-1916	—	30.163	38.100	25.40	—	40000	83600	4400	0.064	—

Product Tags:

full complement needle roller bearing open end

full complement needle roller bearing drawn cup

bearing roller needle b 88

Full Complement Needle Roller Bearing Drawn Cup Open End B-88

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	CHANGZHOU MOUETTE MACHINERY CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Needle Roller Bearing
Brand Name:	MOUETTE
Model Number:	B-24, B-34, B-36, B-44, B-45, B-46, B-47, B-55, B-56, B-57, B-59, BH-57, B-65, B-66, B-68, B-610, BH-68, B-76, B-77, B-710, BH-78, B-88, B-812, BH-88, BH-812, B-108, B-1010, BH-1012, B-128, B-1416, B-168, B-188, BH-1812, B-1910, M-881, M-1081, M-1161
Certification:	ISO/TS 16949:2009, ISO 9001:2008
Place of Origin:	China
MOQ:	100
Price:	USD0.1 per Piece
Payment Terms:	L/C, T/T, D/A, Western Union, Paypal
Supply Ability:	500,000 Pieces per Month.
Delivery Time:	3-45 working days.(Huge Quantity Stocks Available))
Packaging Details:	Plastic bags, Cartons and European Standard Plywood Case.
Name:	Full Complement Drawn Cup Needle Roller Bearing
Drawn Cup Type:	B, BH Series with Open Ends; M, MH Series with Closed One End
Basic Design:	Full Complement Bearings
Measurement System:	Inch
Rolling Elements:	Needle Roller - Full Complement
Cage:	No cage, Full complement needle rollers
Material for Outer Ring:	Steel
Material for Needle Rollers:	chromium steel 100Cr6