KDF1000 Ultrasonic Doppler Flow Meter For Channels Pipes Culverts Rivers Water Flow

KDF1000 Ultrasonic Doppler Flow Meter

Introduction
KDF1000 series flow meter is a product that measures the velocity and flow of water in natural waters, channels, or pipelines.
The flow meter is divided into two parts: the sensor and the host, which are connected by a cable.
It can measure the speed and flow of water in channels and rivers, and the water level is more than 20 cm higher than the top of the sensor.
It can measure the speed and flow of water in pipes and culverts. The water level must be more than 20 cm higher than the top of the sensor, and the inner diameter of the pipe must be ≥ 500 mm.

Principle
The sensor has two transducers, one transmitting and one receiving. When the sensor is facing the direction of water flow, that is, under the premise of reverse flow measurement:
1. When the water is still, the received frequency is the same as the transmitted frequency.
2. The faster the flow rate, the faster the frequency received by the receiving sensor, which will be higher than the transmitting frequency.
3. The slower the flow rate, the slower the frequency received by the receiving sensor, but it will be higher than the transmitting frequency.
When the sensor measures along the direction of water flow:
1. When the water is still, the received frequency is the same as the transmitted frequency.
2. The faster the flow rate, the faster the frequency received by the receiving sensor, but it will be lower than the transmitted frequency.
3. The slower the flow rate, the slower the frequency received by the receiving sensor, but it will be lower than the transmitting frequency.
From the above, the water flow velocity and direction can be calculated.
The sensor must be directly facing the direction of water flow during installation and use.

Technical Parameter

Standard measurement status
After power on, the flow rate and flow rate will be output after 60 seconds, and then a data will be output every 15-20 seconds.
In the standard measurement state, the sensor directly sends 485 signals to connect with the host, and the host outputs two kinds of data: flow rate and flow rate through the 485 interface.

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.