AC220V 50HZ Pouch Cell Battery Assembly Line Standing Box Vacuum Rest Chamber

Pouch Cell Battery Assembly Line Standing Box Vacuum Rest Chamber

I. Functional Overview

This equipment uses the upper cavity to press on the bottom plate to form a closed cavity, (time can be set) without opening the cavity, and then perform secondary air extraction to form a negative pressure of -70KPa, and stop for a period of time (the time can be set Set), and then use the same action for the third vacuum to reach a negative pressure of -95KPa, so that the air in the cell is removed; the two trapezoidal vacuuming methods are to prevent a large amount of electrolyte from being pumped out, and at the same time. Allow the electrolyte to penetrate completely.

II Technical Parameters

0. Length :(80-200mm, include tab),width:(50-150mm, include air pocket),

1. Dimension L x Wx H≈550x440x750mm(Maximum height after opening
2. Cycle times: 0-3 times can be set
3. Pumping time: 0-60min can be set
4. Standing time: 0.1-99S can be set
5. Opening stroke: 250mm
6. Inner diameter of vacuum tube: 25mm, vacuum: 63³/H (63 cubic meters/H)
7. Vacuum degree of static box: ≤0.095Mpa (vacuum is kept for 1 minute to ensure ≤0.090Mpa)
8. III Basic parameters:

IV Processing performance:

4.1 For double cylinders on the side, ensure that the total height after opening the door is less than 750mm.
4.2 This machine adopts the separate design of the host and control box, so that the machine can be used in the glove box and can also be placed on the assembly line.

4.3 It can be applied to product batteries of different specifications, and the adjustment is simple and convenient.
4.4 The upper cavity is driven by a cylinder and guided by four linear guide sleeves, which can move up and down flexibly, and the guidance is accurate to ensure the requirements of product tightness
4.5 This machine uses a vacuum gauge to accurately reach the set time.
4.6 Small size, can save space; light weight, easy to carry. Electric control can be used for automatic operation when moving.
4.7 Static vacuum degree -30~-95kpa, static cabinet tightness: pressure drop 5kpa time> 1min;
4.8 The standing time of the standing box, the degree of vacuum, the number of vacuum pumping times and the holding time can be set freely;

V. Security

It has a safety protective cover, so that the moving parts are inside the protective cover, and the double button is used to start the battery to ensure personal safety when placing the battery.

VI. Safety, environment and other requirements

1. The noise generated by the normal operation of the equipment is ≤70db (detected at 1m away from the equipment);
2. The load-bearing requirement per unit area of the plant: ≤400kg/㎡;
3. During the entire production process, ensure that the surface of the cell is free of scratches, damage, stains, wrinkles, and electrolyte;
4. Paste various safety warning signs on the parts of the equipment that may cause personal injury;
5. The equipment has an interlocking relationship between front and rear actions in manual or automatic mode to avoid the danger of misoperation;
6. The production and installation of equipment such as water, electricity, gas, and steam conform to national standards, and the use of vacuum generators is proh

Gelon Teams since 2003 engaged in battery business,Enterprises from the initial Ni-MH battery production extends to the production of lithium ion battery materials and battery . Most of the senior management staffs graduated from China's most famous electrochemical professional --CENTRAL SOUTH UNIVERSITY, from which created a lot of leaders in Chinese lithium ion battery industry such as Mr ChuanFu Wang(BYD),Mr XinDe Xia, Mr KaiHua Xu, Professor GuoRong Hu and XinHai Li Etc. Owning a group of experienced engineers and staffs, we can bring you not only reliable products and technology, but also excellent services and real value you will expect and enjoy. Gelon Focus on manufacturing and selling of new materials (anode, cathode, separator, additive etc. ) for lithium ion battery, and also offer full sets of materials solution to customers. Our preponderant products are Lithium Iron Phosphate(LFP), Lithium Manganese Dioxide(LMO), Lithium Cobalt Oxide(LCO), Lithium Nickel Manganese Cobalt Oxide(NMC), Lithium Nickel Aluminum Oxide(NCA) ,Lithium Titanate Oxide(LTO) materials; Graphite materials (MCMB) , Separator & Other accessories (SBR CMC NMP PVDF,Sup-Li,Al&Ni Tabs )etc for new power lithium ion batteries. Meanwhile, we have our own lithium ion battery factory who mainly produces lithium ion battery for camera, mobile, EV application. Based on our battery production line, we can offer all services (Raw Materials, Equipments, Production line design &Technology, etc. ) for full set of equipments to help clients to set up Lab & Pilot line for lithium ion battery. Bynow, Gelon have finished many turn key project in Bolivia,Indonesia, Indian, Russia,Turkey and South Africa We have a more than ten years professional and experienced exporting teams to supply perfect services for all our customers. We are confident on our quality and service.And ensure to offer the best services based on our specialty and empressement. Our Aim is to be the comprehensive company dealing with One-Stop services for Lithium ion battery in the world. Our Business Philosophy: You choose us, We promise you What we offer to you,are what we are using Integrating the quality resources in China, delivering the best service and products to you. The best product we can provide, is our sincerity and reliability.