3KW Power Smallest 2L Mini Spray Dryer Lab Drying Machine

• Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.
• Automatic control: one-touch power-on, set the spray process parameters, the temperature reaches the predetermined temperature, peristaltic pump start-up, the touch screen displays the animation, the operation flow is clearly displayed; shutdown simply press the stop button, the machine automatically shut down safely .
• Manual Control: If you need to adjust the process parameters during the experiment, you can easily switch to the manual state, the whole process of dynamic display color touch screen (animation)

• There is a nozzle cleaner (needle), the nozzle is blocked, it will automatically clear the needle frequency can be automatically adjusted.
• Shutdown protection function: just press the stop key when shutdown, the machine stops running immediately except the blower to ensure that the equipment will not burn out due to misoperation (forcing the blower off).
• Spray, drying and collecting system is made of transparent, high-quality borosilicate heat-resistant glass material, which allows the drying process to be carried out in a pollution-free environment.

• Built-in imported oil-free air compressor, powder particle diameter was normal distribution, mobility is very good, the noise is very low, less than 60db.
• Two-fluid spray atomization structure, the whole machine is made of high-quality stainless steel materials, compact design, no ancillary equipment.
• Dry temperature control design using real-time control PID temperature control technology, so that the whole temperature control temperature accuracy, heating temperature control accuracy ± 1 ℃.
• In order to maintain the purity of the sample, equipped with air inlet filter.
• Feed rate can be adjusted by feed peristaltic pump, the minimum sample size up to 50ml.
• After drying the finished powder, the particle size is more uniform, more than 95% of the dry powder in the same particle size range.
• For sticky materials, there is a nozzle cleaner (through needle). When the nozzle is blocked, it will be automatically cleared. The frequency of the needle can be adjusted automatically.
• Innovative tower wall purge, material recovery rate higher.