1044-2592m3/H Split Case Water Pump 380V 6kV 10kV Horizontally Mounted

Double Suction Horizontal Split Case Centrifugal Water Pump COS350-630 (1044-2592m3/h @ 69-140m)

COS Series pumps are double suction horizontal split case centrifugal pump, they are single-stage, double suction, horizontally mounted, applied for general water supply, booster service, municipal waterworks, condenser cooling, water circulation, industrial service, building service, chemical plant, power plants etc.

The split case pump is the right choice for a wide range of applications with medium to high flow rates. The optimized design of the split case pump ensures high efficiency and durability.

High efficiency
The shapes of impeller and pump casings are optimized to achieve the highest possible efficiency for the specific design flow rate and pressure head. Off design characteristics are optimized to give each pump a wide operating range, ensuring that cavitation limits are not exceeded.

Easy maintenance
The pumps are easy to maintain as the upper half can be removed without dismantling pipe connections and driver components so that the alignment is not disturbed. In addition, our service department offers financially attractive service and maintenance contracts, which guarantee that downtime in pumping installations is kept to a minimum.

Split case water pumps are the workhorses of industrial and municipal applications. They are more expensive than end-suction or vertical inline pumps, and not as flexible or adaptable as vertical turbines. However, what they lack in low-cost flexibility they make up for in durability, efficiency, and dependability.

A split case wate pump, properly installed, designed, and operated, can provide decades of service. Most split case water pumps are axially-split – which means that the flange at which the pump casing separates is in the same plane as the pump axis. Radially split water pumps are also available, and are commonly used in very high-pressure and high-temperature industrial applications (boiler-feed pumps are one common application for radially-split water pumps).

The diagram and images shown on this page are for the more run-of-the-mill axially-split variety that are used extensively in municipal water, industrial, oil & gas, and mining applications.

While split case water pumps are typically mounted horizontally, as shown in these images, it is no unheard of for split-case pumps to be mounted vertically, and a few manufacturers offer specialized bases and casings designed for this arrangement. However, most manufacturers simply adapt a standard horizontal design for vertical mounting – a practice that is not without safety concerns and, as a result, a fair share of detractors.

Parameters of COS350-630

Applications

General residential & industrial water supply & transferring;
Agricultural irrigation & drainage, Flood discharge & Emergency drainage;
Civil water treatment, Waterworks, Sea water desalination;
Air-conditioning, Fire-fighting facilities, High building water supply;
Oil & Gas & Chemical processing, Abrasive liquids transferring;
Power plant water circulation, Cooling tower & Hot water transferring
Mining, Boiler feeding, etc.

SANCHANG PUMP is a professional pump manufacturer located in Hunan, China. We have our own machinery workshop, assembly line, testing facilities, and warehouse. Now, we mainly produce industrial pumps like double suction split case centrifugal water pump, multistage centrifugal water pump, end suction centrifugal water pump, emergency drainage water pump, etc.

Our pumps are widely applied to fields and applications like industrial water supply and transferring, civil water works, high building water supply, waste water treatment and disposal, power plant cooling system, hot water circulation & boiler feeding, heating network pipeline, fire fighting system, agricultural irrigation, raw water intake, flood disposal & emergency drainage, sea water desalination plant, fish farm, shipyard, mining water disposal and petrochemical liquid handling, etc.

The ISO9001 quality management system applies in our design, production, sales and customer service of industrial pumps products, and related standards are strictly carried out during the whole procedures like pump design, production, inspection and testing. Now our products already exported to many countries in regions like Southeast Asia, Africa, Mid-East and Latin America.

OEM is available since we could produce pumps according to clients’ technical requirement, and also could provide systematic solutions and consulting based on their specific site conditions. About the service, remote online technical support and on-site consulting service could be provided according to clients’ request, and we also could dispatch our after-sales team to client’s site for equipment commissioning and maintenance if needed. Please believe that all of the clients are in good hands, since our experienced engineers and sales team are eager to solve all your faced problems.