Sign In | Join Free | My frbiz.com |
|
Categories | Emergency Exit Sign Battery |
---|---|
Brand Name: | Godson or OEM |
Model Number: | Ni-Cd Battery Pack SC1800mAh 3.6V |
Place of Origin: | Guangdong, China (Mainland) |
MOQ: | 50PCS |
Price: | Negotiable |
Payment Terms: | T/T |
Type: | NiCD |
Capacity: | 1800mAh |
Voltage: | 3.6V |
Configuration: | Stick Type |
Cell Dimension: | 23 +0 -1.0(D), 42.5±0.5(H) |
Expected Life: | 5 years |
Company Info. |
Godson Technology Co., Ltd |
Verified Supplier |
View Contact Details |
Product List |
Nickel Cadmium Rechargeable Battery Pack SC1800mAh 3.6V - Good Cycle Life
Product parameters:
Pos. | Product Paramaters | Data |
1 | Standard Charge Mode | 0.1C for 16 hours |
2 | Cycle Life | ≥500 times |
3 | Operating Temperature | (-20℃) - (+70℃) |
4 | Storage Temperature | (-30℃) - (+60℃) |
5 | Cell Dimension | 23 +0 -1.0(D), 42.5±0.5(H) |
6 | Expected Life | 5 years |
7 | Packaging | Standard export package or customized package |
8 | Cell Weight | ≈47.5g |
Test | Specification | Conditions | Remarks |
Open Circuit Voltage(OCV) | ≥1.25V | After 24 hours standard charge | |
Capacity | ≥1800mAh | Standard Charge/Discharge | Up to 3 cycles are allowed |
0.5C Discharge | ≥110min | Standard Charge, 1hr rest before discharge | End voltage 1.0V |
Permanent Charge Endurance Test | T1≥195min T2≥170min | (See note 2) | |
Internal Impedance (Ri) | ≤20mΩ | Following a standard charge period, Checked at 1000Hz with 1~4 hour | |
Overcharge | No leakage nor deformation | Standard discharge 180mA(0.1C) charge 48 hours | |
Charge Retention | ≥1170mAh | Standard Charge, Storage:28 days, Standard Discharge | |
Charge Efficiency | ≥270min | Standard discharge Recharge at 0.1C for 10 hours,then Discharge at 0.2C to 1.0/cell. | |
Leakage | No leakage nor deformation | Fully charged at900mA(0.5C), Storage for 14 days | |
IEC Cycle Test | ≥500 Cycle | IEC 61951-1:2003 | (see Note 3) |
What are the different parts of a battery? A short summary:
--anode: the negative electrode during discharge. While charging,
this becomes positive. In AA and AAA batteries, this is usually the
protruding part on the top.
--cathode: the positive electrode during discharge. While charging,
this becomes negative. In AA and AAA batteries, this is usually the
flat part on the bottom.
--seal: a part of the battery cell that makes sure chemicals cannot
leave the battery. It also limits air intake. A good seal is
essential for a safe battery.
Technical battery terms explained
Whereas they're simple to use, the electrical processes are often a
little more complex. Let's take a look at the most common technical
battery terms used:
--capacity: the amount of energy that is stored inside a battery.
It is measured in mAh (milliamp hours).
-- voltage causes electric charges to move through the wire or
other conductors. It is measured in volt (V).
-- cycle: one sequence of charge and discharge, or: how many times
you can use and recharge a battery. Every rechargeable battery has
a set amount of cycles (i.e. cycle life) before it starts losing
capacity and efficiency.
Ni-Cd Battery Cell Performance:
1. Ni-Cd Cell Charge Curve At 0.1C For 16h At 55 Degree
2. Ni-Cd Cell Discharge Curve At 0.25C At 55 Degree
3. Ni-Cd Cell Charge Efficiency At Different Temperature
4. Ni-Cd Cell Capacity Change At Permanent Charge At 55 Degree (0.05C Floating)
5. Ni-Cd Cell Cycle Life Curve
FAQ
Q1:Are these new cells?
yes 100% ,factory direct.
Q2: Are you a trading company or manufacturer?
A: We are globally trusted supplier and manufacturer of emergency
lighting battery, emergency lighting products, whose batteries
range covers Ni-Cd, Ni-MH, LiFePO4,, Lion-polymer and other
relevant lithium batteries.
Q3: Can you do OEM?
A: Yes, OEM is acceptable. You can provide the detailed
specification requirements to us, our engineers can design the most
suitable battery solution for you.
Q4: Is it possible to buy a sample to test?
A: Yes. You can buy a sample to test.
![]() |