Reusable Human Body Temperature Sensor For Medical Monitoring Equipment

Reusable Human Body Cavity Temperature Sensor for Medical Monitoring Equipment

Brief Instruction:

Medical human body cavity temperature sensor ( esophgeal/ rectal temperature probe) be used for human body cavity temperature measurement, Used for the patient monitors. The sensor be composed of epoxy bead and Mono audio plug 6.3mm. Meanwhile, we also accept the customized plug or connector. The rated resistance value 2.252kΩ or 10kΩ. The measured temperature tolerance within ±0.1℃, compatible for replacement YSI400 series sensor.

Features:

Epoxy encapsulation

Reusability

Temperature tolerance

(25~45)℃±0.1℃

Operating temperature range: 0℃~50℃

Application:

Suitable for medical monitoring equipment

Structure and Dimensions:(Unit:mm)

Standard packing (inner packing): 1 pcs/polybag

Operation Notice

1.Application:Temperature measure ；　

2.The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3.Avoid excessive heat shock,The hot air blow should beat least 30mm to the probe in case heat shrink protection tube need to be attached.

4.Storage Temperature 0℃～50℃,30%~80%RH；Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, especially when the component is heated.

Product Picture:

Hefei Jingpu Sensor Technology Co., Ltd. is a national high-tech enterprise integrating R&D, production, and sales of thermistors and temperature sensors which was established in 2014 and obtained IS09001 Certification in 2015, IS013485 Certification in 2018, CE Certification for medical products in 2019, and Medical Device License and Registration Certificate in 2020.

Our products include various epoxy-encapsulated and glass-encapsulated thermistors and various shell-encapsulated temperature sensors that are widely used in the medical industry (such as monitors, medical equipment, bacterial incubators, medical refrigerators, etc.), smart wearable devices, automobiles (such as water temperature, oil temperature, air conditioner, filter, intake pressure temperature, steering wheel, rearview mirror, tyre, battery pack, etc.), home appliances (such as air conditioner, refrigerator, electric water heater, induction cooker, electronic calendar, etc.), portable power bank, fire alarm, meteorology, ocean, etc.)

Our Duty: Attentively Do Every Temperature Sensor

Our Dream: To Be One of the Most Famous Sensor Manufacturer

Our Motto: To Benefit Others Is To Benefit Oneself