Double Convoluted Air Spring Shocks Continental FD 40-10 CI With Clamped Plates G1/8 Air Inlet

Continental FD 40-10 CI With Clamped Plates G1/8 Air Inlet Double Convoluted Air Spring Shocks

Refer NO.

Contitech FD 40-10

Contitech FD40-10

Contitech FD 40 10

Contitech FD40 10

Contitech FD 4010

Contitech FD40-10CI1/8NPTOS

Contitech FD40-10 CI 1/8NPT OS

Continental FD 40-10 CI

2B4060 Specifications and Tecnical Parameters

1. Nut/blind nut Top plate screw (nut) teeth: 1 x M8X1.25

2. Bottom cover plate screw (nut) teeth: 2 x M8X1.25

Bottom plate screw center distance : 20 mm
2. Air hole/air inlet/air fitting air hole/air inlet: G1/8

Screw Center Distance Between Gas Hole and Nut : single
3. Top plate diameter (width): 90 mm, bottom cover diameter (width): 90 mm bell-shaped rubber bellows rubber bellows diameter: 125 mm

4. Bumper block/bumper block without bumper
5. Belt loop/belt loop with belt loop: with one piece of belt loop

Min. pressure: 0 bar

Return force to min.height: ≤200N

Overall weight with clamped plates: 1.1kg

Vibration isolation - dynamic characteristic values

Design Height H: recommended 160mm, minimum 150mm

Pneumatic application-static characteristic values

Force F[KN]

Other Double Convoluted Contitech Air Spring Replacement We Could Offer:

The related picture of 2B40-10

Tips for Safely Using Air Springs

First of all, the air pressure used should be within a reasonable range. If the air pressure is too low, the air spring cannot expand normally, resulting in lack of elasticity, and the air springs are easily damaged due to mutual friction. If the air pressure is too high, the air spring will expand too much and be easily damaged or even burst.

Secondly, the working stroke of the air spring should also be within the allowable stroke, otherwise it will affect the normal service life of the air spring and cause unsafe factors.

Finally, when installing the air spring, try to ensure that the upper seat and the lower seat are on the same centerline, and do not offset and tilt, which will cause internal friction of the air spring and affect the use of the air spring. If it is too offset, too tilted, it may be ejected from its original installation position. Do not interfere with any parts, and take measures to prevent the impact of hard objects.

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.