Factory custom size excavator standard bucket cbm for excavator
brand hitachi sany komatsu doosan volvo
1. Standard bucket: The material uses Q345B high-quality steel,
domestic high-quality bucket teeth, tooth seat, this bucket is
mainly used for digging earth and sand, soil gravel and loading and
other light working environment.
2, reinforced bucket: the material uses Q345B high-quality steel,
the side edge plate and tooth base plate of the bucket are
relatively thick, the bucket makes the domestic quality bucket
teeth, tooth base, prolong the service life, the bucket is mainly
digging hard soil, mixed with soft stone and soil, soft stone
loading and other light working environment.
3. Scree type bucket: The material is Q345B + NM360 + HARDOX500
high-quality steel, the side edge plate and the bottom
reinforcement plate of the bucket are made of the best domestic
NM360 steel, and the tooth seat plate is made of imported HARDOX500
steel, so the scree type bucket material has wear-resisting and
bending resistance. This bucket is mainly used to excavate gravel,
gravel, soil mixed with hard stones, secondary hard stone, wind
fossil loading and other heavy duty operating occasions.
| standard | Strengthen | | standard | Strengthen |
CBM | Weight(kg) | Weight(kg) | CBM | Weight(kg) | Weight(kg) |
0.1 | 100 | | 0.65 | 600 | 650 |
0.15 | 140 | | 0.8 | 620 | 800 |
0.2 | 180 | | 1 | 720 | 920 |
0.25 | 220 | 320 | 1.2 | 920 | 1120 |
0.3 | 260 | 350 | 1.3 | 1050 | 1200 |
0.4 | 400 | 420 | 1.4 | 1150 | 1450 |
0.5 | 460 | 600 | 1.5 | 1250 | 1600 |








