Adjustable Rock Wool Sandwich Panel Machine Equipment Discontinuous

Discontinuous Exterior Decorative Wall Panels Rock Wool Sandwich Panel Production Line


Specification

Suitable for ceramic board, calcium silicate board, metal board, etc.
Suitable for polystyrene board, extruded plastic board, polyurethane foam board, rock wool board, etc.
1. Production speed of production line: 3-4pcs/min (about 6m finished products)
2. Product drawings are shown in the drawings signed by both parties
3. Production line covers an area of about 48m×3m wide×1.8m high
4. Production line labor: 3 persons
5 production line power: about 60KW
6 production line environment working environment requirements
1) Ambient temperature: 0℃～50℃, relative humidity: ≤90% (25℃)
2) Three-phase AC power supply: 380V (±10%), 50HZ
3) Compressed air: 0.5～0.6Mpa

Process

Automatic Decoiler→feeding and heating platform→gluing part→composite material feeding part→preheating platform→laminated lamination→finished product discharging platform→automatic palletizer

Machine List

Main Technical Parameters

1. Rolling material material: material for color coated coil, steel plate, aluminum plate

2. Rolled material thickness: 0.5-1.2mm

3. Rolled material width: 350-1250mm

4. Inside diameter of rolled material: φ500-620mm

5. Production line production speed: 3-4pcs/min (about 6m finished products)

6. product drawings see both sides signed drawings

7. precision and technical requirements of the manufactured parts: length ±1.0mm, port distance ±1.0mm, straightness 0.5mm/m, width tolerance ±1mm, punching notch position degree error: ≤0.3mm; symmetry ±1.5mm; basic square plate and superimposed fit: 99% for plane fit, 99% for bevel fit. Punch shall not have burr, should be flat punching smooth. (Other technical requirements not specified are subject to the requirements of the drawings confirmed by both parties under seal)

8. Production line covers an area of approximately 35m x 3m wide x 1.8m high

9. Production line labor: 2 people

10. production line power: about 22KW

11. production line environment working environment requirements

1) Ambient temperature: 0℃～50℃, relative humidity: ≤90% (25℃)

2) Three-phase AC power supply: 380V (±10%), 50HZ

3) Compressed air: 0.5～0.6Mpa

12. appearance quality of square plate: no obvious zinc bloom off the surface, loss of surface galvanized layer ≤ 10g/m2, no burr in punching notch.

13. Appearance requirements after punching: smooth and burr-free inner wall and perimeter of the hole.

Application

The main products of factory is light gauge framing machine, pre-painted steel forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, The whole carriage plate for car beam unit , Steel storage unit, etc. Totally it has 100 types in 20 serious. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas, residential, greenhouse and other construction projects. Our factory can meet the construction enterprises, automobile industry, iron and steel production enterprises’s growing demand.