High-Efficiency Ultra-Fine Porous Metal Fiber Felt And Titanium Fiber Felt

High-Efficiency Ultra-Fine Porous Metal Fiber Felt And Titanium(TA1) Fiber Felt

Hydrogen can be used as a clean and renewable green energy, and Proton Exchange Membrane water electrolysis (PEMWE) to produce hydrogen is one of the main methods for hydrogen production. The technology uses the proton exchange membrane (PEM) as a solid electrolyte to replace the alkaline electrolyte and diaphragm, and uses pure water as the electrolyte.

In the PEM water electrolysis hydrogen production device, the membrane electrode composed of the diffusion layer (Gas Diffusion Layer, GDL), the catalytic layer and the proton exchange membrane is the main place for the electrochemical reaction of the electrolytic cell, and is the core component of PEMWE.

The Gas diffusion layer(GDL) not only has the functions of supporting the Catalyst Coated Membrane (CCM), evenly distributing the reaction water, and discharging the generated gas in time, but also can realize functions such as conducting current, and is one of the key components affecting the performance of the electrolytic cell.

A good diffusion layer material should have the following characteristics:

1) Good electrical and thermal conductivity, the contact resistance between the electrode catalysts can be kept at a low level to reduce the electrolysis overpotential;

2) Strong acid corrosion resistance, the diffusion layer of the anode should have good resistance to oxidation corrosion in order to overcome the long-term contact oxygen evolution reaction, while the cathode

The extremely diffusion layer should be resistant to hydrogen embrittlement in order to overcome the long-term exposure to hydrogen evolution reaction;

3) Porous and elastic, since the diffusion layer is close to both sides of the membrane electrode and plays a supporting role for the membrane electrode, it can withstand a certain pressure;

4) Long service life and cheap price.

In the comparison of titanium fiber felt, sintered titanium plate and carbon paper as anode diffusion layer, it is found that titanium fiber felt has the best electrolytic performance, the smallest ohmic resistance and good stability, so titanium fiber felt is more suitable as the anode diffusion layer of PEMWE.

1. DESCRIPTION

Our Porous fiber felt is produced with ultra-fine metal fibers through special processing non-woven laying and high temperature sintering. The main materials include TA1, Hastelloy,316L and Fecral so on.

Ultra-fine titanium fiber porous felt has the advantages of high porosity, uniform pore size distribution and strong corrosion resistance. It is an ideal anode diffusion layer application material for PEM hydrogen production.

2. Main features:

Hydrogen energy PEM-WE pure water electrolysis hydrogen production

The ultra-fine titanium fiber felt achieves the best performance in the anode diffusion layer of PEM for water electrolysis hydrogen production with high porosity and high specific surface area.This results in more efficient fluid and gas passage.

In the field of hydrogen health, it is the most preferred material for improving the purity of hydrogen,the stability and lifetime of electrolyzers.

Key words:

★Uniform pore size distribution

★strong corrosion resistance

★good water permeability

★high porosity

★ good heat dissipation

★ high current density

★low voltage

★ stable performance and long service life.