2000L/H Commercial Reverse Osmosis Water Treatment Systems Housing SUS 304 With Auto Valve

2000L reverse osmosis purification system, SUS304 reverse osmosis purification system, AUTO value

2000L/H Water Treatment System is equipped with quartz sand filter, activated carbon filter, if you want to have more pure Water quality, you can also choose to install sodium ion filter and precision filter.

How to choose filter?

Next, I will cover sodium ion filters and precision filters in detail

1, Sodium ion filter is used to remove calcium ions and magnesium ions in water and make softening water. Softening principle of ion exchanger equipment: Sodium ion exchanger is equipped with a certain height in the sodium type cation exchange resin as the medium of exchange when hard water through this exchange column resin layer from bottom to top, the calcium and magnesium ions in the water absorbed by the resin sodium, sodium and the sodium ion in the resin is displacement into the water, so as to remove calcium and magnesium ions in raw water, to soften hard water obtained.

2, Precision filter body made of SUS304 material filter made from PP spray melting (generally replaced every six months) in the prior to prevent failed to completely remove or new small satellite (tiny quartz sand, activated carbon particles, etc.) bacteria into the reverse osmosis system, protect the high pressure pump and reverse osmosis membrane, usually set in front of the reverse osmosis water filter type security filters. Generally, the aperture is less than 10μm, and 5μm or lower can be designed according to the actual design situation. Different materials such as PP cotton, nylon and melt-blown are used as filter elements, so that the quality of raw water can meet the inlet requirements of reverse osmosis membrane.