Watch Chains Home Ultrasonic Cleaner Vinyl Record Cleaner 750ml

Watch Chains Home Ultrasonic Cleaner Vinyl Record Cleaner GT-F6

GT SONIC GT-F6 Home Small Ultrasonic Cleaner is new upgraded product, minimalist design, efficient cleaning, with 5 cycle digital timer. It is ideal for cleaning jewels, glasses & timepieces, shaver heads, metal articles, etc. The device uses powerful 40,000Hz frequency of sound wave to lift and agitate the dust practicals without causing any harm to them. This ultrasonic clenear is with 750ml volome and 35W power, good for home use. And it's with very beautiful looking, is a good gift for your family and friends. Even it's Ultrasonic Glasses Clenaer for glasses, but not only for glasses, also good for clean other items, such as makeup brusher, Jewelry, necklaces, rings, wahtches, shaver header,

Features:

1. Minimalist design.

2. One-button easy operation.

3. 5 cycle digital timer: 180S-280S-380S-480S-90S.

4. Transparent cover with perfect visibility.

5. Certificates: CE, FCC, ROHS.

Specifications:

Applications

Jewelries: necklace, rings, earrings, bracelets etc.

Glasses and timepieces: eyeglasses, watch chains, waterproof watches etc.

Commodities: shaver heads, razor blades, dentures, combs, toothbrushes etc.

Metal articles/Dishware: watch parts, coins, spoons, forks etc.

Stationery: pen-heads, printer-heads, inject cartridges, seals etc.

Before and After

Packing Details:

FAQs:

1. When Should I Use an Ultrasonic Cleaner?
Ultrasonic cleaners are unsurpassed when it comes to removing contaminants from virtually any hard surface that can be safely immersed in a water-based (aqueous) cleaning solution. The challenge is selecting the correct ultrasonic cleaner; its accessories, cleaning solution formulations, and cleaning procedures to accomplish tasks in the most efficient manner.

2. How Does the Process Work?
Ultrasonic cleaners are fitted with transducers attached to the bottom of a tank filled with the cleaning solution. Transducers create vibrations at high frequencies measured in thousands of cycles per second (kHz) and send sound waves through the cleaning solution. These waves produce millions of tiny vacuum-filled bubbles that shoot out a powerful jet of liquid when they implode. The force of the implosions, calledcavitation action, lifts contaminants off objects being cleaned. The process is tough enough for carburetors but gentle enough for electronics and surgical instruments.

3. Where is Ultrasonic Cleaning Applied?
While we use the term ultrasoniccleanerthese devices do a lot more than clean parts, be they engine components, injection molds or surgical implants. For example, they are used to degas solvents, disperse nanoparticles, and emulsify, dissolve, disperse and otherwise prepare lab samples.

4.Do I need a parts basket?
Absolutely (but with some exceptions*). Why? Baskets are used to support parts in an ultrasonic cleaner. They affect cleaning efficiency and the lifetime of the tank. Note that some equipment manufacturers may include baskets with the ultrasonic cleaning unit; others may offer them as options.
Baskets with insulated handles facilitate placing and removing parts being cleaned in hot liquid. They also keep parts off the tank bottom where they suppress vibration and lower cleaning effectiveness.
In terms of tank life, keep in mind that the bottom of the tank is a vibrating membrane. Any solid item, particularly a metal part, can act as a drill while the ultrasound is operating. Over time this can wear a hole in the tank. That’s a good enough reason to use baskets.
Some baskets hang on the tank rim; others are equipped with rubber- coated feet positioned near the corners of the tank bottom where there is minimal vibration. Fine mesh baskets for small parts can be positioned in beakers or standard baskets.
*Industrial-size ultrasonic cleaners may be equipped with bottom racks to support large products; others may be designed to accept products suspended in the cleaning solution.

5. Do I need a Heater?
Most cleaning operations are much more effective with heating. A heated cleaning solution is best for removing oils, machining coolants and a whole host of other contaminants from just about any surface you can think of.
Although heat is a natural byproduct of ultrasonic cavitation, cleaning efficiency increases when you give it a boost by using ultrasonic cleaners with thermostat-controlled heaters. These can be adjusted in increments to 80⁰C above which cavitation is inhibited and cleaning efficiency levels off.
On the other hand if you are removing blood, don’t use heat at all.

Guangdong GT Ultrasonic Co., Ltd (GT SONIC), established in 2007, is the unique public company in ultrasonic field. With more than 50 patents.
With more than 12 years of industry experience, you can enjoy higher cost performance products and professional service from us.
With legitimate and creditable management, you can safely do business with a reliable manufacturer.
With a stable and rapid development team, we can enjoy a glorious future together.

Basic information:

Established in 2007 in Shenzhen, China

Being the unique public company in ultrasonic filed in 2015.

Registered capital: US$7.7 million US dollars

Factory located at 60 Acres GT SONIC technology park, Meizhou in Guangdong

Plant size: 4000 M2

Sales office size:1500 M2

Number of staff: 200-300

Annual sales volume:10 million US dollars

ISO International Standard: ISO 9001 Quality Management, ISO14001 Environmental

Our products certificates: CE,FCC,ROHS,GS,PSE,

Manufacturer certificates: ISO9001:2008, ISO14001:2004.