Moisture Proof Heatproof Sound Insulation Felt 1mx5mx3mm

Soundproof Felt Heatproof Install Inside The Wall To Sound Insulation

Desdening felt is a new type of insulation material that made by new high-tech process.It is made of

polymer materials,metal power and all kinds of catalyzer through the reaction preparation.

Easy to cut,glued,sewn,nailed or mechanical compound.Combustion safe,self-extinguishing after removing

the flame,do not produce burning drops.

Installation

1. Should pay attention to the direct rigidity contact between the wooden panel, and aluminum keel on the wall. The wall

of the contact point should use mass loaded vinyl as gasket, in order to avoid so called "sound bridge" and reduce the

amount of noise.

2. Often at the top lighting, exhaust fans, smoke detectors or air conditioning duct and other facilities, in such case, noise

processing to be done at the top of each component, while the fan duct, air conditioning duct do pipe muffler process.

3. If the use of insulation material required, and pay attention to handling sheet metal and insulation blankets installed with seam.

4. Try to avoid sound leakage phenomenon if there is electrical wiring.

5. Projects with high sound insulation requirements must be treated with the room-in-room sound treatment program, which

involves the sound insulation board.

Jiangsu Suyin New Materials Technology CO.,Ltd. is a new type of enterprise, specializing in the research, development, production and service of acoustic products.