V9100iC Monitouch V9 Series Human Machine Interfaces

V9100iS Programmable Display V9100iS Series 10.4 inch HMI

Features

Dimensions and Part Names

		V9100iC
Power supply	Rated voltage	100-240V AC/ 24V DC
	Permissible range of voltage	AC: -15%, +10%/ DC: ±10%
	Permissible momentary power failure	AC within 20ms, DC within 1ms
	Demand (maximum rating)	AC: 50VA or less/ DC: 17W or less
Insulation resistance		DC500V 10MΩ or more
Physical environment	Ambient temperature	0～50℃*1
	Ambient humidity	85%RH or less (without dew condensation)*1
	Operation altitude	2,000 meters or lower
	Atmosphere	Not to be exposed to corrosive gas, or conductive dust
	Storage temperature	-10～60℃*1
	Storage humidity	85%RH or less (without dew condensation)*1
	Overvoltage category	Category II
	Pollution degree	Pollution degree 2
Mechanical operating conditions	Resistance to oscillation	Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
	Resistance to shock	Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total)
Electric operating conditions	Resistance to noise	Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns
	Resistance to static discharge	Complies with IEC61000-4-2, contact: 6kV, air: 8kV
Installation conditions	Grounding	Grounding resistance: Less than 100Ω, FG/SG separation
	Structure	Front panel:Complies with IP66, Type 4X/13 *2 (when waterproof gasket is installed) Rear cover:Complies with IP20 Form: Single unit, Installation method: Panel mounting
	Cooling system	Natural air cooling
	Dimensions W*H*D(mm)	303.8×231.0×54.0
	Panel cutout (mm)	289.0×216.2(+0.5/-0)
Case color		Light gray (black front housing for black model)
Material		PC resin

• *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

Performance Specifications

Screen memory (FROM)		64MB
Backup memory (SRAM)		800KB
Display	Display device	TFT color LCD
	Resolution	640×480
	Display size	10.4″
	Colors	16.7 million *3
	Backlight	LED
	Backlight life	70,000 hours
Touch switch	Type	Analog resistance film
Function switch	Quantity	8
External interface	D-Sub 9-pin (CN1)	RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*4bps
	Modular 8-pin (MJ1/MJ2)	RS-232C/ RS-485(2-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
	SD card	One card slot provided as standard
	Ethernet	1ch, Baud rate: 100Mbps, 10Mbps
	Wireless LAN	-
	USB	Type A,Type mini-B(Ver.2.0)
	Sound output	-
Clock	Backup period	5 years (Ambient temperature 25°C)
	Calendar accuracy	Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
Standard	CE marking*5	EN61000-6-2,EN61000-6-4
	UL･cUL*5	UL61010-1,UL61010-2-201*6
	KC*7	Compliant
	Radio Act	-
Classification Standard		-

• *2: DC products only. Hardware of Ver. b or later.
• *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
• *4: Only for Siemens MPI (Incompatible with DUR-00).
• *5: DC products only.
• *6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
• *7: Black model not certified

Dimensions and Part Names

(Unit: mm)

Side view	Front view	Rear view

Bottom view	Panel cutout

Part Names

1. Display
2. Function switch
3. Power lamp
4. Communication unit connector (EXT1)
5. Fall prevention hook
6. Optional unit connector (EXT2)
7. SD card access LED
8. Battery holder
9. DIP switch
10. USB cable holding hole
11. SD card connector

12. Sound output connector (AUDIO)
13. Power input terminal block
14. Modular jack 1 (MJ1)
15. Modular jack 2 (MJ2)
16. PLC connector (CN1)
17. 100BASE-TX/10BASE-T port (LAN)
18. USB-A(U-A)
19. USB mini-B(U-B)
20. Screw hole

Changsha Zhinian Automation Equipment Co., Ltd (Reach Import And Export Co.,Limited) has been a reliable retailer specializing in famousbrand industrial automation products for more than a decade. With its headquarter located in Changsha, the capital city of Hunan province, we set up branches and warehouse in Dongguan city in Guangdong province for sake of convenient delivery.

Our company mainly deal with advanced automation products which are sounding brand 100% original new, such as Programmable Logic Controllers , Human Machine Interface, Servo motor,Sensor,Encoder, Inverter, Servo drive, Battery, Cable ,Relay Switch of Mitsubishi, Omron, Proface,Fuji,Siemens and so on.

We are fully responsible to all of our products and strictly control the product quality. We focus on befor-e after sales service, consult, quality guarantee, training base on customer benefit and satisfy.