Rubber Plate Hydraulic Vulcanizing Machine 380 Volt 50HZ Power

CE Certification Plate Vulcanizing Machine Hydraulic Press For Rubber Vulcanization

hydraulic machinery
Due to the structure of the mechanical vulcanizer itself, the mechanical vulcanizer has the following problems:
1. The moving pairs on the main force-bearing parts such as connecting rods and crank gears are sliding bearings composed of copper sleeves, which are easy to wear and have a great impact on accuracy;
2. The clamping force on the upper and lower molds is uneven. For a dual-mode tire curing machine, the force on both sides is greater than the force on the inner side;
3. The parallelism and coaxiality of the upper and lower hot plates, the roundness of the manipulator claws and the coaxiality of the inner hole of the lower hot plate are low in precision grades, especially the repeatability is low;
The clamping force is determined by the elastic deformation of each force-bearing member when the crank pin reaches the bottom dead center. The temperature change causes the size of the force-bearing member to change, and the clamping force also changes. Therefore, the temperature fluctuation during the production process will cause fluctuations in clamping force.

Introduction to the structure of the vulcanizer:

1. Structural stability: a special four-column structure is adopted, the upper seat is reinforced with medium carbon steel, and the upright column is thickened and hardened to ensure structural stability and accuracy.

2. System: The high plane pressure equalization correction is adopted, and the pressure (18mpa) strengthens the nut leveling device, which can increase the parallelism of the upper and lower heating plates to 0.05mm.

3. Temperature control system: Adjustable from room temperature to 350°C, using intelligent temperature control to control the temperature fluctuation range within ±2°C.

4. Operating system: PLC combined with touch screen, whether debugging or production, can be controlled directly and simply.

5. Operating system: The optimally designed oil circuit and high-quality oil circuit accessories ensure the smooth operation of the entire oil circuit system from the principle and accessories.

6. Energy-saving system: The heating plate adopts the deep hole processing technology, which is closely matched with the heating pipe to reduce the heat loss during the heat transfer process.

7. The intelligent system can automatically push out the mold, thereby reducing the labor time of the staff, increasing efficiency, high output and saving time.

Scope of application:

Children's toys, baby products, kitchen supplies, clothing labels, equipment seals, etc.