| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | Switch Life Tester |
|---|---|
| Brand Name: | Sinuo |
| Model Number: | SN2207-M |
| Certification: | Calibration Certificate (Cost Additional) |
| Place of Origin: | China |
| MOQ: | 1 |
| Price: | Customized |
| Payment Terms: | L/C, , T/T, Western Union, MoneyGram |
| Supply Ability: | 100 sets per month |
| Delivery Time: | 3 Days |
| Packaging Details: | Aluminium Box |
| Applied Standard: | IEC 60068-2-63 |
| Impact Energy: | 0.14/0.2/0.35/0.5/0.75/1J |
| Element Mass: | 250g±5g |
| Overall Mass: | 1450g±10g |
| Element Material: | Stainless steel |
| Impact Method: | Manually |
| Company Info. |
| Sinuo Testing Equipment Co. , Limited |
| Verified Supplier |
| View Contact Details |
| Product List |
IEC60068-2-63 0.14/0.2/0.35/0.5/0.75/1J Six-Energy Impact Hammer
Product Overview:
The Spring Hammer (Impact hammer) is made according to the standards of IEC60068-2-63 and IEC60068-2-75. This spring hammer is intended to test the impact resistance to shell, operating arm, handle, knob, indicator lights and shades of electrical appliance for household or similar purpose, to verify the safety performance and strength of the product.
Technical Parameters:
| Model | SN2207-M |
| Impact energy(J) | 0.14, 0.2, 0.35, 0.5, 0.7, 1 |
| Impact element mass | 250g±5g |
| Impact element material | Rubber |
| Overall mass | 1450g±10g |
| Shell material | Stainless steel |
Operation steps:
1. Rotate the energy switching cover to choose required test energy.
2. According to the related standards, please fix (or place) the sample.
3. Choose the impact test point. And pull the cocking knob, until the release jaws engage with and the hammer lever teeth (you will hear “click” sound at this time). Then the device is in a ready state.
4. Make the device be vertically opposite to the impact test points on the surface of the sample and well touched, then press down the device body, making the hammer release, to finally strike on the surface of the sample.
Notice
1. After calibrating the device, don’t disassemble it or adjust the compression amount of the spring.
2. If the compression amount of the springs is adjusted, the device must be checked by the measurement department before being used. Otherwise, the accuracy of testing results will be directly influenced.
3. In order to prevent changes of impact energy caused by misoperation, the products have been sealed in the factory. If you have any question, please contact our factory, we will provide you post-technical services.
4. Measures should be taken to prevent the rust of the hammer spring (drying moisture proof processing).
5. Requirements for environmental conditions: temperature 5~35℃, humidity 45 ~ 75%.
|
100mm Drop Tester EN 71-1 Toys 1KG Impact Strength Test Apparatus
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball Pressure Test
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test System
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets Breaking Capacity Test
IEC 60065 230° Rotating Angle Corrosion-resistance Metal Mandrel Test Apparatus
IEC 60950 Clause 2.3.5 Switch Life Testing Machine 130A Test Generator
Mechanical Antenna Coax Sockets IEC 60065 Harden Steel Test Plug
IEC 60065 R6mm Stainless Steel Probe Figure 2C Telecom Test Probe
Sinuo Switch Life Tester Mexican Temperature Rise Test Plugs With Brass Pins IEC 60884-1 Chapter 19 BS1363
Mexican Brass And Copper Clamping Units For Temperature Rise Test IEC 60884-1 Figure 44
