iron Power Bms Battery Management System For solar energy storage 60S 192V

60S 192V bms lifepo4 battery management system 100a charging voltage RS485 balance module bms

Model No.: RBMS07S60S100A

BMS integrated machine components are composed of BMS main control board, BMU

sampling board, high voltage board, switching power supply, Hall sensor, DC contactor, micro

switch, power terminal, structural box and wiring harness, etc.; the characteristic is that the main

control board Integrate with sampling board and other power devices to keep the system as a

secondary architecture. It has the characteristics of compact structure, flexible installation and

low cost, and is suitable for integrated installation with small capacity batteries. The BMS

integrated machine component is mainly suitable for the charge and discharge management of

lithium iron phosphate batteries (LFP). If you need to modify the parameters with other batteries,

please contact our company for confirmation.

--APPLICATION SCENARIO--

1. Home storage

2. Island off-grid energy storage

3. Micro-grid applications

4. UPS power supply

5. Power System 220V DC power supply

--System Features--

• Each 15 strings is a battery collection unit, and 75 series batteries have 5 acquisition units.
• 15 probes for every 15 strings, for a total of 15
• current collection uses Hall sensor, safe and reliable, no heat;
• SOC estimation error ≤ 5%;
• 3-digit address dialing to set the BMS address;
• 3-channel relay dry contact output;
• LED signal indicates working status (4-bit SOC indication, 1-bit operation indication, 1-bit fault indication)
• 3-digit address dialing to set the BMU address;
• 3-channel relay dry contact output;
• 4-channel contactor expansion and auxiliary contact detection;
• Provide PC software to facilitate the customer to debug the battery system, or modify the
  system parameters through the host computer;
• Support temperature module expansion;
• Support Bluetooth, GPRS, external serial port display expansion (extended function single machine three choice one);
• Support for parallel use (maximum 7 units)
• The default system overcurrent capability is 100A

Hunan group control energy technology Co., Ltd. (GCE) is a high-tech company specializing in the research and development of BMS and lithium battery peripheral equipment.

working in the factory:

 The high-performance intelligent lithium battery management system produced by our company adopts the international leading technology, which greatly improves the battery management efficiency and prolongs the service life of lithium battery. The advanced BMS control strategy avoids the difficulties and instability faced by most competitors for our BMS.

4S to 24s low voltage software BMS has a wide range of uses, rich product interfaces, strong scalability and secondary development compatibility; 30s to 75s BMS adopts master-slave integrated design and relay solution to meet the lithium battery demand of multiple strings of small capacity batteries. Greatly reduce the use cost of users; 60s-270s adopts master-slave three-level architecture, which can meet the series and parallel requirements of high-capacity single lithium batteries within 1000V.

By mastering the core technology of BMS and inventing on this basis, our company has developed a variety of lithium battery peripherals to meet the high-quality needs of the market.