Micro 2v Ceramic 3030 70-100lm 620-632nm SMD LED Chip For Medical Illumination

2V 350MA 0.67W CERAMIC3030 70-100LM 620-632NM SMD LED CHIP FOR Medical Illumination Photo Therapy

Forward Voltage Groups

Group Forward Voltage 4)

I = 350 mA

Centroid

Group

Centroid Wavelength 3)

I = 350 mA

λcentroid

Relative Spectral Emission

Irel = f (λ); IF = 350 mA; TJ = 25 °C

Radiation Characteristics

Irel = f (ϕ); TJ = 25 °C

Dimensional Drawing

Further Information:

Approximate Weight: 28.0 mg

Package marking: Anode

Corrosion test:Class: 3BTest condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43)

ESD advice: The device is protected by ESD device which is connected in parallel to the Chip.

Reflow Soldering Profile

Product complies to MSL Level 2 acc. to JEDEC J-STD-020E

Profile Feature Symbol Pb-Free (SnAgCu) Assembly Unit

Minimum Recommendation Maximum

All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range

Phoenix (suzhou) Electronic Co., Ltd is a modern enterprise specializing in LED packaging production. Products are widely used in UV curing, sterilization, office lighting, commercial lighting, advertising lighting and other fields. The company was founded in 2008. After nearly ten years of precipitation and accumulation, our company is full of talents and vitality. There are more than 5000 square meters of workshops and supporting facilities, more than 60 new production lines, a large number of professional engineering and technical personnel, rich production experience and advanced production technology. They often analyze and customize products for customers, which can not only meet the special-shaped needs of customers, but also meet the needs of large-scale orders.