Dimmable Ceiling Mounted Motion Sensor 120VAC 277VAC Operating Voltage

Dimmable Ceiling Mounted Motion Sensor 120VAC 277VAC Operating Voltage

Detached Design 6M Ceiling Mounted 120-277VAC Operating Voltage Dimmable Senor

Features:

1. 5.8GHz microwave motion sensor with dimmable function.

2. Optional detection range,holdtime,daylight threshold,stand-by dimming level and stand-by period.

3. Smart detached design,the sensor can be small to fit into the LED PCB board.

4. Suitable for tri-proof and linear light.

5. Supports DIP switch programming and remote control.

6.Installation height accessiable 2.5-6m.

7. IP 20 with 5 years warranty.

Product Description:

ON/OFF Control Detection Area Daylight Threshold Remote Control

Warranty 5 years Hold Time Stand-by period stand-by dimming level

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6m.

Mechanical structure

1-10v dimming

with two installation hole for easy connect the end user lamp

9 DIP switchs set parameters which you want

Settings:

By selecting the combination of the DIP switches,sensor will be precisely set for different applications.

Detection area:

In this area,movement will be detected and able to trigger the sensor,100% detection area is also known as the strong sensitivity.

Hold time:

The period of light keeping 100% brightness after moving object leave the detection area.

Daylight threshold:

Difinition of ambient brightness;only when the ambient brightness is lower than the preset spercific LUX amount,the sensor will work;when it's perset "Disable" the sensor works everytime it detects motion regardless ambient brightness.

Stand-by period:

The period of light keeping low output before it's completely switched off,when it's preset as"∞" the light always keep at low output if no movement in the detection area and doesn't turn off.

Stand-by dimming level:

The definition of the lower output in the stand-by period.

Remote control setting and DIP switch setting shift:

If the sensor was set by DIP switch at last time,all setting will be follow the DIP switch setting no matter any key was changed,for example:once user changed the detection range by change the switch1 and 2;all other settings(hold time;stand-by period;daylight sensor;stand-by dimming level will follow the DIP switch setting even user did not changed the others.

If user change any setting by remote control at the last time,the setting will be changed by the relevant button only,other settings will remain.for example:when user changed the hold time by press the hold time buttons,the hold time will change only,other settings(detection range;stand-by period;daylight threshold;stand-by dimming level) will follow the previous setting.

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.

With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function:

User Notes:

1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

HD407V-CR .pdf

Shenzhen HAISEN Technology Co.,Ltd，founded in March 2013, has become a National High-Tech and ISO9001:2015 certificated Enterprise.Our new facility, an owned property is located along Songshan Lake of Dongguan city, neighbor of HUAWEI. Total footage is 8,000m², with about 300 people.

We focus on developing and manufacturing 5.8G and 10.525G microwave motion sensors, PIR Sensor and wireless control smart sensor products. We have about 40 R&D engineers, they master core hardware technology and software algorithm.

We produce the sensors all by ourselves. In our facility, you can see our SMT manufacturing room, product dept with 4 semi-automatic DIP lines, indepedent automatic testing rooms and package lines.

We have 30 people for Quality Center and we strictly follow ISO9001:2015 quality management system.
The quality center are 2 parts：
Comprehensive Testing: Verification & Assessment of product function and performance at early R&D stage

Quality Control: Quality supervision on incoming materials, manufacturing process and delivery.

Our Marketing Center is constitute by Marketing, Domestic Sales and International Sales.
To better support our customers, we have set up local offices in East China and Xiamen; and developed agents in China and all over the World.