Indoor Light Microwave Dimmable Motion Sensor LED Linear Highbay For Surface Mounting

Dimming Function Indoor Light Microwave Motion Sensor LED Linear Highbay

Features:

1. 5.8GHz microwave motion sensor with dimming function.

2. Supporting different installation and applications,for surface mounting,traditional LED high bay with aluminium reflector,UFO highbay or linear/triproof highbay light.

3. Max installation height is 15m/49.2ft.

4. All parameters can be setting by remote control.

5. Sensitive and reliable..

6. IP 20 with 5 years warranty.

7.1-10v dimming

Product Description:

ON/OFF Control Detection Area Daylight Threshold Remote Control

Warranty 5 years Hold Time 8-15m Highbay Stand-by Period Stand-by Dimming Level

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 8-15m.

Mechanical structure

With remote control to set all parameters

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.

With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

User Notes:

1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

Memory & Apply Mode

1. Press "ON/OFF button" to turn on the light or off.

2. To reset the parameters, Please follow the steps as below:

Step 1 - Press ON, to turn on the light if it was off at the start.

Step 2 - Press "Start" to the well-setting sensor.

Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level,

Stand-by period and Daylight threshold one after the other in sequence (Press "+/-" to

set parameters).

Step 5 – Press “Memory” to memorize the settings.

Note: The interval of each parameter setting shall be controlled within 30s.

Isolated Setting Mode

1. Press "ON/OFF button" to turn on the light or off. Press "Scene", the remote will

activate settings that were saved last or remain at the factory default settings.

2. To reset the parameters, Please follow the steps as below:

Step 1 - Press ON, to turn on the light if it was off at the start.

Step 2- Press any button of "Scene", Test" and "Apply" to begin the sensor detection

mode.

Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level,

Stand-by period and Daylight threshold one after the other in sequence.

3. To programme other lights in the array that have similar sensors to the same

programme.

Step 1 - Press "ON" to the second sensor

Step 2 - Press "Apply"

Notes:

1. Settings will be saved automatically and remain until you press reset again.

2. Light will flicker when setting each parameter.

3. The icon will flash when setting the corresponding parameter.

HD406VRH ON&OFF specification.pdf

Shenzhen HAISEN Technology Co.,Ltd，founded in March 2013, has become a National High-Tech and ISO9001:2015 certificated Enterprise.Our new facility, an owned property is located along Songshan Lake of Dongguan city, neighbor of HUAWEI. Total footage is 8,000m², with about 300 people.

We focus on developing and manufacturing 5.8G and 10.525G microwave motion sensors, PIR Sensor and wireless control smart sensor products. We have about 40 R&D engineers, they master core hardware technology and software algorithm.

We produce the sensors all by ourselves. In our facility, you can see our SMT manufacturing room, product dept with 4 semi-automatic DIP lines, indepedent automatic testing rooms and package lines.

We have 30 people for Quality Center and we strictly follow ISO9001:2015 quality management system.
The quality center are 2 parts：
Comprehensive Testing: Verification & Assessment of product function and performance at early R&D stage

Quality Control: Quality supervision on incoming materials, manufacturing process and delivery.

Our Marketing Center is constitute by Marketing, Domestic Sales and International Sales.
To better support our customers, we have set up local offices in East China and Xiamen; and developed agents in China and all over the World.