Home > Power Banks >

3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted

Categories	Car EV Charger
Product Name:	Charging Station For Electric Vehicle
50Hz/60HZ Average Trouble-free Time 8760 Hours Charging Capacity Up To 22KW Operating Temperatur:	50Hz/60HZ
charging power:	3.5KW/7KW/11KW/22KW
Voltage:	220V 250V 380V
Operating Temperature:	-30 ℃ To 55 ℃
Start Method:	"Plug and play" or RFID Card
Output Current Range:	0~32A
Charging Port:	3 ports, 2 ports, 1port, 4 ports, Type C

Contact Now

Add to Cart

Company Info.

JIANGYIN TOPSUN TECH CO., LTD

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Product Details
Company Profile

3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted

7KW Type 2 Wall Mounted Home Charging Station For Electric Vehicle Car

Specification

Wall Mounted EV Charger Power Specification
	EU Standard
Charging Connector Type	IEC 62196-2 (Type 2)
AC Power Input Rating	1 Phase	3 Phase
AC Power Input Rating	230V±15%	380V±15%
AC Power Output Rating	3.5kw/16A	11kw/16A
	7kw/32A	22kw/32A
		43kw/63A
Frequency Rating	50/60 Hz
User Interface & Control
Emergency Stop Button	Yes	Plug-and-Charging	Yes
RFID Card Charging	Yes	App Charging	Yes
Ethernet Interface	Yes	Wifi Function	Yes
OCPP Protocol	OCPP 1.6	4.3-inch LCD Screen	Optional
Protection
Over Voltage Protection	Yes	Under Voltage Protection	Yes
Over Load Protection	Yes	Short Circuit Protection	Yes
Earth Leakage Protection	Yes	Ground Protection	Yes
Over-temp Protection	Yes	Surge Protection	Yes
RCD	Type B
Environmental
Storage Temperature	-40 ~ 75℃	Operating Temperature	-30 ~ 55℃
Operating Humidity	Up tp 95%, non-condensing	Altitude	≤2000m
Cooling Method	Natural Cooling
BC-EV32P Wallbox Mechanical
IP Code	IP65	Dimension(H×W×D,mm)	420×310×24
Weight	12kg	Charging Cable Length	5m or Customize
Enclosure Material	Front-panel: Tempered Glass, Back-cover: Plate Metal
BC-EV32P Mounting Pole(Optional)
Dimension(H×W×D,mm)	1400×200×100	Weight	＜8kg
Enclosure Material	Metal

All products must pass the following inspection before leaving the factory:

1. Function test:
A.charging function control test,
B.communication function test,
C.insulation detection function test,
D.vehicle plug locking function test,
E.pre-charging function test

2. Charging output test:
A.four ui large constant power output test,
B.power control test,
C.low-voltage auxiliary power test,
D.output current response time test,
E.transmission out current stopping rate test,
F.efficiency test,
G.power factor test.

3. control guide test:
A.charging control state test,
B.charging connection control timing test,
C.control guide voltage limit test,
D.communication interruption test,
E.protection grounding continuity loss test,
F.connection detection signal disconnection test,
G.battery voltage and communication message match test,
H.battery voltage exceeds the charger range test,
I.draw battery two protection function vehicle zu high allowable total voltage mismatch test,
J.charging demand is greater than Battery parameters test.

Product Tags:


*From:	Your email address is incorrect!
*To:	JIANGYIN TOPSUN TECH CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted

3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted

3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted

3.5KW hybrid charging point at home

7KW hybrid charging point at home

electric charging point home FCC

3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted