TJA1021T20CM 118 LIN Transceivers TJA1021 ISO 17987/LIN 2.X/SAE J2602

TJA1021T20CM 118 LIN Transceivers TJA1021 ISO 17987/LIN 2.x/SAE J2602 transceiver

General description

The TJA1021 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN.

It is primarily intended for in-vehicle sub-networks using baud rates from 1 kBd up to 20 kBd (/20 variant) and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 (12 V).

The TJA1021 is pin-to-pin compatible with the TJA1020 and MC33662(B).

The transmit data stream of the protocol controller at the transmit data input (TXD) is converted by the TJA1021 into a bus signal with optimized slew rate and wave shaping to minimize ElectroMagnetic Emission (EME).

The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, an external resistor in series with a diode should be connected between pin INH or pin VBAT and pin LIN.

The receiver detects the data stream at the LIN bus input pin and transfers it via pin RXD to the microcontroller.

In Sleep mode, the power consumption of the TJA1021 is very low. In failure modes, the power consumption is reduced to a minimum.

Ordering information

TJA1021T/10 and TJA1021TK/10: for the low slope version that supports baud rates up to 10.4 kBd (SAE J2602);
TJA1021T/20 and TJA1021TK/20: for the normal slope version that supports baud rates up to 20 kBd

Pinning information

LU'S TECHNOLOGY CO., Ltd. (LU’S) was established in 2014. One of the largest electronic components distributors in Hongkong and Shenzhen, China.

LU’S provides a full range of services for long-term orders, providing design-chain service, with a complete electronic components supply and distribute system.

Component categories include active components (IC integrated circuits, memory chips, diodes, transistors, etc.) and passive components (capacitors, resistors, inductors, etc.) and electromechanical components (connectors, switching devices, etc.).

Quickly feedback and satisfy customers’ need.

Let’s make development easier.