Ceramic Bearing Contra Angle Dental Handpieces 2500rpm

Dorit Ceramic Bearing 20: 1 Implant Fiber Optic Contra Angle Dental Handpiece

​

20: 1 Implant Fiber Optic handpeice technical data

Features

Instruction:

After each treatment,Sterilizing handpiece in autoclave according to the following steps:

1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.

2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.

3.Place into autoclaving pouch and mark.

4.Autoclave the handpiece for 12 min. at 135ºC.

Operation Instruction:

It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.

After using,Please follow the instruction to sterilize the handpiece:

1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.

2 lubricate the handpiece,pour two drops into air tube one time.

3 wrap it with sterilization package and mark.

Henan Dorit Biotechnology Co., Ltd. always takes “quality bearing responsibility, technology creating advantage, innovation leading the future ” as its development concept, and conscientiously implements to the operation, management, product research and development and manufacture.

During the process of serving global oral industry , Dorit takes every step as walking on the thin ice. We not only innovate bravely, but also go ahead steady step by step.