YJ60 80B H Beam Straightening Machine Hydraulic

YJ60/80B High Effective H-Beam Flange Hydraulic/ Mechanical Straightening Machine

Technical Parameters of YJ-60B hudraulic straightening machine

• The max thickness of flange: 60mm
• Flange width: 200-800mm
• Web thickness: ≤ 32mm
• Height of web: ≥350mm
• Workpiece material: Q235A, Q345-B
• Workpiece thickness and width of the corresponding relationship:

• Drive motor: 22kw
• Maximum output torque: 55770N.m
• Workpiece running linear speed: 7.496m / min
• Pumping station drive motor: 15kw
• Pump displacement: 25ml / r
• The maximum system pressure: 20Mpa
• Voltage: 380V 50Hz

structure and the main configuration

● The equipment consists of main motor, reducer, driving roller, correction roller device, active roller lifting cylinder, web plate, wing clamping device, main frame, frame, front and back conveying roller table, hydraulic system and electrical system. The device is compact, strong, rigid enough.

● The hydraulic pump station is a peripheral independent system, which is provided by professional hydraulic company

● The driving wheel is made of forging and pressing, the material is 35CrMo, the hardness is HRC50-55. (35CrMo: strength, toughness, hardenability are high, used for large cross-section gear and heavy drive shaft, rolling mill herringbone gear, large motor shaft, turbine generator spindle. 40Cr: quenched and tempered after a good overall mechanical properties , Is widely used quenched and tempered steel for shaft parts and crank crank, car steering knuckle, connecting rod, bolts, gears, etc.)

H-beam Flange Straightening machine is a kind of H-beam straightening equipment developed byour company.Its main transmission system is adopted with 22KW motor and driven by cycloidal gear speed reducer,with high transmission efficiency and rapid straightening speed.All the straightening rollers are all made of quality steel ,and have gone through advanced heat-treatment,insuring long-term stability and usage without defects as crack,etc.Besides,all the parts and components are reinforced.The machine is equipped with operating box so as to ensure easy operation.