380V 50Hz 2.5m/Min Double Wall Panel Extruder With 58mm Hole

Double Wall Panel Extrusion Machine

Product Introduction

The JQT double light partition wall panel extruder can produce two light partition wall panels with a span of 600mm at the same time, which improves the production efficiency and the utilization rate of the site.

Working principle
This machine integrates the multi-processes of cloth, vibration, forming and demoulding produced by

lightweight partition board: the main motor transmits the power to the reduction box through the pulley,

and the output shaft of the reduction box drives the spiral stirring knife in the frame (wall Plate), vibrator

and pedestal constitute the forming cavity to rotate; the light mixture from the hopper is continuously

conveyed to the forming cavity, and the light mixture is squeezed by the spiral stirring knife in the forming

cavity and the vibrator is continuous Under the dual action of vibrating, it produces resonance and is

continuously squeezed and compacted, and reaches the required shape, size and compactness. At the

same time, the vibrated and compacted strip produces a reaction force against the rotating stirring knife,

pushing the extruder continuously Advance to achieve continuous plate making.

Parameters

Main characteristic
1. One machine with double panels improves production efficiency.

2. The board density is uniform, which changes the situation that the board at the boundary between

the left-handed and right-handed knives has low strength and is easy to crack from there after assembly.

3. High mechanical degree; full hydraulic lifting. Saving raw materials: Broken steel wires can be manually

connected and used; the produced slats can be produced to reach the end reinforcement, so that there

is no waste of steel and mixed materials at the end of the pedestal, and the utilization rate of the pedestal is improved.

4. Channel steel track can be omitted, saving the cost of making the pedestal, reducing the difficulty of

production, and improving the precision of production.

5. Long service life, the main wearing parts can be more than 80,000 meters, the vibration plate can be

more than 100,000 meters, and the side wall board can be more than 60,000 meters.

The company's main products are: Steel door Embossing machine, Roof sheet roll forming machine, Glazed tile roll forming machines, Stud & track roll forming machine, Highway guardrail roll forming machine, Purlin roll forming machine,Roller shutter door roll forming machine, Sandwich panel roll forming machine,Light steel villa roll forming machine, Rotary punching machine, Cable tray roll forming machine, and other cold roll forming machine. The company adheres to the service tenet of "quality first, credit first",  the concept of "quality is their food for enterprise ". We will provide customers with high quality products and after-sales service.