1.5inch Urethane Retractable Leveling Casters 360 Rotation All In One

How to maintain the single wheel of casters
Users should operate properly and do not overload. When the goods are heavy, put them on the

vehicle with care. High speed driving on rough roads or heavy objects hitting the wheels will cause

damage to the wheels or equipment. Therefore, check regularly

Industrial casters usually refer to a kind of caster products used in mechanical equipment or factories.

Industrial casters can be single wheels made of reinforced nylon (PA6), super polyurethane and rubber.

Industrial casters have high impact resistance and strength as a whole.

Casters: if the movable steering is too loose, replace it immediately. If the caster center rivet is fixed by

a nut, the nut must be locked firmly. If the steering is not flexible, check whether there is foreign matter

or corrosion at the ball. If a fixed caster is installed, ensure that the caster support is not bent.

Support and fasteners: tighten the loose axle and nut and check whether the support is twisted.

Overload or impact will distort the support. The distorted support will tilt and press the heavy load on

individual wheels, resulting in premature wheel damage. The casters of plug-in rod type shall be

tightened with nuts or riveted firmly, and ensure that the equipment installation support is not bent

and the plug-in rod is installed correctly. When installing castors, use locknuts or lock washers. The

expansion plug rod caster shall ensure that the plug rod is firmly installed in the casing.

Lubrication: add lubricating oil regularly (usually every six months) to ensure that the wheels and

movable bearings can be used for a long time. Apply grease to the friction parts in the sealing ring,

axle and roller bearing to reduce friction and make rotation more flexible. After cleaning the car,

lubricate the wheels.

Wheel: observe the wear of the wheel. Whether the wheel rotates smoothly is usually related to

sundries such as rope. Adding anti winding cover can prevent the winding of these sundries. After

checking and replacing the wheel, tighten the axle with a jam nut. Loose axle can cause friction and

jamming between wheel width and support.

Light Duty Caster Wheels Parameter

Light Duty Caster Wheels Describe

Light Duty Caster Wheels Material

Light Duty Caster Wheels Scope of application

This wheel master have the advantage of making it easy to remote in a 360 degree are by putting and

in the ball bearing between upper plate and main body, also get a change of direction and move easy.

Light Duty Caster Wheels Size

Function.

About us.

KTC.

The company is headquartered in the Shunyi District Niushan Industrial Zone, Beijing ,The company adopts advanced international production testing equipment and professional intelligent production management system and professional process flow,Current production KT Casters（KT CASTER）,KT Adjusting foot（KT FOOT）High quality products such as multi function,High quality horizontal adjustment of the casters,Shock proof casters,High load casters ,The adjusted feet are widely used in the world's advanced automation equipment and semiconductor equipment and other industries. The company is making the world's highest level of product,Use the most advanced processing technology and equipment,New products emerge in an endless stream.KTC sales network is all over the world,And has set up a company in South Korea,Favored by users from all walks of life around the world