50hz 220V Cooling Heating Air Conditioner Wall Mounted 12000BTU

50hz 220V Cooling Heating Air Conditioner Wall Mounted 12000BTU

UA Panel Inverter 220V R410a/R32 12000BTU Cooling Heating High Quality WifiControl PCB3 Year Warranty Split AC GMCC/GREE

- To adjust the temperature during sleep, the air conditioner can automatically adjust the sleep temperature

- The outdoor unit must be installed firmly to reduce vibration and noise. There must be enough space in front of the suction and exhaust vents of the condenser for ventilation. If the wind is blocked, the condensation pressure will increase and it will cause shutdown;

- There should be no obstacles in front of the indoor unit, otherwise the wind will be affected;

When the air conditioner is running for rapid cooling, the selector switch can be adjusted to the high gear, and after the temperature drops, it can be adjusted to the medium-speed low gear;

- The indoor temperature cannot be adjusted too low, otherwise it is harmful to the human body, so the set temperature should be adjusted appropriately.

- If you feel the room temperature is too high, you can appropriately lower the set temperature.

Effective use of timers can achieve both energy-saving and comfortable effects.

- There should not be too many people or overcrowding in the air-conditioned room, otherwise the cooling capacity will be insufficient and the temperature will not drop;

- Doors and windows of the room should not be opened and closed frequently, and personnel should not enter and exit frequently to avoid loss of air-conditioning;

- The glass windows must be closed and tightly closed, and double white curtains must be hung inside to reflect part of the light and heat that penetrates;

- The window can be opened for a short time during indoor ventilation, and the window opening time is generally no more than 10 minutes

- The air filter should be cleaned regularly, otherwise the air flow will be blocked, resulting in insufficient air volume and increased room temperature

In 2015, Yuetu moved to Ninghua from Wenzhou, and covering an area with 300,000 square meter. There are total 12 production lines with 3 million sets production capacity annually and 95% of the parts self produced, such as heat exchanger, welding, bending, automatic coating, plastic injection, and so on.