ASTM 5115 Hot Rolled Low Carbon Alloy Steel Plates
APPLICATIONS
ASTM5115 is used as the carburized parts whose working speed is
higher and toughness of section of heart is not large.Such as
bushing, crank pin, piston pin, piston ring, coupling, and the
working speed is higher circle of gear, CAM, shaft and bearing,
etc., ship host with screw, small locomotive parts, steam turbine
set of ring, etc.
We can produce ASTM 5115 stainless steel round rods, ASTM 5115
forging,sheet,coil,and profiledstrip,Deformed steel,flat
steel,mould,steel wire,have all specifications. With DuoNian
production experience, strict control ASTM 5115 chemical
composition and ASTM 5115 mechanical properties.From casting,
forging, steel to hot and cold rolling process, heat treatment,
etc, we have the control of professional engineers. We have
advanced precision machining equipment, according to the
requirements of users machining. in order to achieve the most
satisfied with the user requirements.
ASTM 5115 steel round bar is a kind of structural alloy steel under
the ASTM A29/A29M-04 standard, and it is a common low carbon alloy
carburizing steel. ASTM5115 has high cold deformation and
plastic,good weldability and good machinability under the condition
annealing.
AISI 5115 CHARACTERISTICS
Excellent resistance to chloride pitting and crevice corrosion
cracking
Immune to Chloride ion stress corrosion
Maintains hhigh strength at elevated temperatures
Resistant to sea water, in both flowing and stagnant condition
Heat resistant
Main features and application field
Alloy structural steel is provided with higher yield strength,
tensile strength, endurance strength, yield ratio (about 0.85
generally ) enough plasticity and toughness. The concentration of
alloy element of this kind of steel is quite high, mainly are
corrosion resistant steel, heat resistant steel, wear resistant
steel, and other special steels of physical and chemical
properties. Alloy structural steel has preferable mechanical
property than that of carbon structural steel, high performance of
heat treatment especially.
Alloy structural steel are widely used in the filed of ship,
vehicle, airplane, guided missile, weapons, railway, bridges,
pressure vessel, machine tools, mechanical components with a bigger
sectional size and so on.
Manufacturing technique
According to the steel grade and quality requirement, the melting
of alloy structural steel can adopt basic oxygen furnace,
open-hearth furnace, electric arc furnace, electroslag remelting,
vacuum degassing, and appropriate heat treatment.
1:Category
Alloy structural steels are generally divided into hardened and
tempered structural steel and surface hardening structural steel.
Alloy structural steels are divided into plain structure alloy
steel and special use alloy structural steel. The plain structural
steel contains low-alloy high strength steel, cryogenic steel,
super-strength steel, carburizing steel, hardened and tempered
steel, non-hardened and tempered steel, and special use alloy
structural steel contains spring steel, ball bearing steel, free
cutting steel, cold stamping steel.
1. AISI 5115,5117,5120,5120H Carbon steel, AISI 5115 Stock , AISI
5115 steel plate, AISI 55117 steel plate , AISI 5117 adopt standard
, 5120 Technical delivery condition, 5120 Mechanical property ,
5120Hprice , 5120H Impact degree, 5120H impact energy.
2. AISI 5115 Carbon steel, 5117 stock , 5120,5120H Steel Plate.
3. Thickness:5mm to 600mm Width :1500mm to 4500 mm Length:3000mm to
27000 mm
4. Adopt Standard: AISI SAE Standard Specification is Standard
Carbon Steels.
5. Heat Treatment: Hot Rolled, CR, Normalized, Quenched, TMCP.
6. Third Party :ABS ,DBV ,BV,GL,CCS,LR,RINA,KR,NK,CE,SGS,IKE,IEI or
other quality department.
7. Extra Service: Pre treatment(Shot Blasting, Sand Blast, Painting
and Galvanized),cutting Parts, Sample Service, Third party
inspection ,UT test and inspection .
8. Delivery time:5-30 days
9. Payment Term: T/T or L/C.
10. Trade Term: FOB ,FCA,CFR,CIF
ASTM 5115 steel round bar is a kind of structural alloy steel under
the ASTM A29/A29M-04 standard, and it is a common low carbon alloy
carburizing steel. ASTM5115 has high cold deformation and
plastic,good weldability and good machinability under the condition
annealing.
2: 5115 Steel equivalent
Country | Germany | USA |
Standard | EN 10083-3 | ASTM A29 |
Grade | 16MnCr5/1.7131 | 5115 |
3: 5115 steel chemical composition
Grade | C | Si | Mn | P | S | Cr | Mo | Ni |
5115 | 0.13-0.18 | 0.15-0.35 | 0.7-0.9 | 0.035 | 0.035 | 0.7-0.9 | / | 0.03 |
1.7131 | 0.14-0.19 | 0.4 | 1-1.3 | 0.025 | 0.035 | 1.8-1.1 | / | 0.03 |
4: 5115 steel mechanical properties
The mechanical properties mainly include tensile strength, yield
strength, elongation, area or reduction, hardness, impact value,
non-metalic inclusion etc. Different heat treatment, the mechanical
properties will be different, such as normalized, tempered, QT. If
you want to know the properties, kindly contact the salesman.
5: 5115 steel overviews
Size | Round | Dia 6-1200mm |
Plate/Flat/Block | Thickness 6mm-500mm |
Width 20mm-1000mm |
Heat treatment | Normalized ; Annealed ; Quenched ; Tempered |
Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled |
Delivery condition | Forged; Hot rolled; Cold drawn |
Test | Tensile strength, Yield strength, elongation, area of reduction,
impact value, hardness, grain size, ultrasonic test, US inspection,
magnetic particle testing, etc. |
Payment terms | T/T;L/C;/Money gram/ Paypal |
Trade terms | FOB; CIF; C&F; etc.. |
Delivery time | 30-45 days |
Application | 5115 are used for civil and industrial construction, means of
transport, electionics and medical use; in particular we
manufacture filters, injector, connectors, inserts, machined metal
parts, adapters, shafts, gears, tie rods and screws. |