30TPH Table Salt Production Line Large Process Capacity

Newly built Customized process capacity 3-30T/H table salt prodution system

PROCESS OF THE PLANT

Raw salt is sent to a feed hopper at appropriate capacity and then transferred to a conveyor band.

A magnet is used to remove trash metals from this conveyor.

Raw salt is washed in a special washing system.

Crude salt is ground in a wet grinding system with a saturated brine.

Salt slurry is sent to a tank and pumped to a washing tank with one of centrifugal, high-pressure pump, centrifugal pump, axial flow pumps or gear pump.

Slurry is removed from slurry in washing tank.

Saltwater overflowing from washing tank is recycled.

Salt slurry is sent to hydrocyclone to thicken it.

Salt is removed from water in large scale by centrifugation. Iodine dosing is made.

In the fluidized bed dryer, salt is completely dried.

Drying milling is done to thin clumping salts.

Salts are passed through a screening machine to be classified.

If tablet salt production will be carried out, fine grade salt is sent to the rotary tablet machine.

The four washing is as follows

First Screw washing

Second screw washing

Stand-up stirring washing

Countercurrent washing

Three-crushing is as follows:

First crushing

Wet crushing

Dry crushing

The combination of wet crushing, dry crushing and different ways of washing has greatly improved the salt quality. The above

operation is subject to adaptation according to the users’ different requirements due to the use of crude salt of different

quality

The following is the technical procedure of our typical ‘four-washing, three-crushing’ technology.

Advantage of our salt machine:

The high quality refined salt product has high purity, shiny appearance, good free liquidity and stable iodine content.

Low loss, the loss of NaCl is under 10%.

Low energy consumption and investment.

Equipment has long service life, easy to operate and maintain.

Fixed Fluidized Drying Bed Features:

Fixed fluidized bed dry the wet material into bed contact with the hot air in the wind above board, material suspended in the air, the formation of fluidized state, with the increase of gas flow velocity to some degree, the material is boiling state in bed. Under the fluidized material particles and hot air heat transfer, mass transfer, dehydration, drying effect. It can be used for salt, chemical, pharmaceutical and food industries. It is suitable for drying and cooling of dry powder, granule materials.

Specification

Raw Salt

Our client site

Jiangsu Hanpu Mechanical Technology Co., Ltd. is a project engineering company jointly established by Jiangsu Zhongyi Environmental Technology Co., Ltd., FERREO A/S in Denmark, Shanghai Jiaotong University and Nanjing Kingreat Machinery Co., Ltd. The company's production base is located in the Huangqiao Industrial Zone of Taixing, covering an area of 300 acres. The companies involved are in the industry of new material, new energy, medicine, chemical, environmental protection, food, and beverage, etc.

The company has a national functional office and facilities as a scientific research bureau. The research center now has 5 doctor tutors, 8 professional engineers, 11 senior engineers, 42 engineers and 68 assistant engineers making it a leading specialized research bureau.

The company has various kinds of general (special) machinery devices including 480 sets and are the most developed working devices in the world such as: Toshiba CNC boring and milling machine imported from Japan, German Schiess CNC turning processing center, CNC fine plasma cutting machine imported from Germany, Laser cutting machine, CNC folding machine, CNC wire cutting and CNC shearing machine, etc.

The company's main projects include but are not limited to: MVR evaporation system, powder washing salt and vacuum salt production project, oil tank sludge cleaning project, landfill leachate treatment project, plant/animal oil processing production line, urban wastewater treatment project, various wastewater treatment projects, and CBD oil extraction production line. Technical support and transfer of API product technology package. The main products are centrifuge series, multi-effect and MVR evaporation and crystallization equipment, laser welding heat transfer board, lithium battery material mixing equipment, pressure vessel and titanium, zirconium, nickel, and other non-standard special equipment.

The company's sales network throughout the whole world, with a domestic sales market share of 50%, and exported to the United States, Canada, Germany, Spain, France, Switzerland, Sweden, Denmark, Australia, Brazil, Argentina, Chile, Colombia, Russia, Ukraine, Poland, Uzbekistan, Indonesia, Vietnam, Singapore, Malaysia, India, Japan, South Korea, Iran, South Africa, Nigeria, and Rwanda.

The company is an internationally competitive engineering company that integrates technical consulting, design, procurement, construction, installation and driving into one, providing engineering EPC general contract, project management, engineering supervision and other comprehensive, full-process services. The company is Committed to be the first and world-renowned technology and technology engineering company in Asia, providing cutting-edge technology and one-stop solutions for the world's industries.