Brief Introduction
RO4350B High Frequency Circuit Material is glass reinforced
hydrocarbon/ceramic laminates (Not PTFE) designed for performance
sensitive, high volume commercial applications. Currently double
sided and multilayer RO4350B PCB’s are available at Bicheng
company. Double sided RO4350B PCB with thickness 10mil (0.254mm),
20mil (0.508mm), 30mil (0.762mm) and 60mil (1.524mm) are the
bestsellers. We provide prototype runs, small batches and volume
production services.
Advantages
1) Excellent high frequency performance due to low dielectric
tolerance and loss;
2) Excellent dimensional stability.
3) Low thermal coefficient of dielectric constant;
4) Low Z-Axis expansion;
5) Low in-plane expansion coefficient;
6) Stable electrical properties verus frequency;
Applications
1) Attenuator, Automatic gate induction;
2) LNB's for direct broadcast satellites;
3) Microstrip antenna, spread spectrum;
4) Microstrip and cellular base station antennas and power
amplifiers;
5) RF identifications tags
6) Spread spectrum communications systems
7) Trunk amplifier, splitter module etc.
PCB Case: Immersion Gold PCB On 30 mil RO4350B With Double Layers
(Printed circuit boards are custom-made products, the picture and
parameters shown are just for reference)
General description
This is a type of double sided PCB built on high frequency
substrate with Tg 288°C for the application of 4G WiFi Module. It's
0.8 mm thick, white silkscreen over green solder mask. All via's
are open to air. Pads are plated by immersion gold. The base
material is used from Rogers RO4350B, entire board supplying 1 PCB
up. They're fabricated per IPC 6012 Class 2 using supplied Gerber
data. Each 25 panels are packed for shipment.
Features and benefits
The dielectric constant (DK) is low and stable, so the signal
transmission is good without delay;
Delamination of copper foil will not be caused by the change of
cold and heat due to the consistency with the thermal expansion
coefficient of copper foil;
Excellent dimensional stability;
Good high temperature and low temperature resistance(-192℃-260℃);
UL recognized and RoHS Directive-compliant;
Electrical test and high voltage test;
Impedance control test and solder-ability test;
Micro-section and thermal stress test;
Reliability test, insulation resistance test and ionic
contamination test;
Meeting your PCB needs from prototype to mass production;
Application
Low noise amplifier, acoustic detection sensors, Optoelectronic
Transmitters, 4G antenna
Parameter and data sheet
| PCB SIZE | 67 x 33mm=1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| LAYER STACKUP | copper ------- 35um(1 oz)+plate TOP layer |
| RO4350B 0.762mm |
| copper ------- 35um(1oz) + plate BOT Layer |
| TECHNOLOGY | |
| Minimum Trace and Space: | 5 mil / 4.5 mil |
| Minimum / Maximum Holes: | 0.3 mm / 4.6 mm |
| Number of Different Holes: | 7 |
| Number of Drill Holes: | 105 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | |
| Glass Epoxy: | RO4350B Tg280℃, er<3.48, Rogers Corp. |
| Final foil external: | 1.5 oz |
| Final foil internal: | N/A |
| Final height of PCB: | 0.8 mm ±10% |
| PLATING AND COATING | |
| Surface Finish | Immersion Gold |
| Solder Mask Apply To: | TOP, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | TOP |
| Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | Plated through hole(PTH), minimum size 0.3mm. Solder mask uncovered |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Why choose us?
1) Focus on your core competencies: We’ve deeply known it is full
of fierce competition for our customers in the market. You can
focus on such important competencies as research and development,
sales and marketing based on our professional performance and
skilled services that exceeding your expectation.
2) Cutting-edge technology: it is rational for a small and
medium-sized customer to hanker after the latest equipment and
manufacturing expertise for its PCBs. By the partnerships
with Bicheng PCB, you gain access to reach your expectation with
our 3 factory bases with over 26,000 square meters.
4) Save the cost of production: Production cost is one of the key
points of our customers’ product competitiveness. Bicheng PCB have
been striving to reduce its manufacturing cost from equipment
introduce, worker training and technology improvement to increase
their profitability. Customers are satisfied with our cost savings
but without quality loss.
5) Avoid hassle: It’s an upset matter when quality problem hassling
you. Bicheng engineering design prevents problem from occurring in
pre-production. You will not get headache with Bicheng prototypes,
small orders and volume production. Our rate of customer complaint
is less than 1% and will be solved satisfactory.
6) Save time: Market requires the products updating quickly.
Bicheng PCB always works fast and flexible to save the time of
production from prototype to standard production,
quick turn-around or scheduled deliveries.
7) An excellent team: Bicheng is trustworthy partner with passion,
discipline, responsibility and honesty. We have a team of
experienced sales persons and skilled customer services. Do not
change your supplier. If change is must, Bicheng is the right one
for you.
Microwave PCB Boards Built On RO4350B 10 mil With Immersion Gold
