24v 335w 340w 345w Mono Perc Solar Panels Half Cut TUV Test

FSM335~FSM345M60HB (335W/340W/345W) 120*9BB MONO PERC Half-Cell Full Black PV Module

Electrical Characteristics under STC

Mechanical Characteristics

Key Features

• Anti-reflective coated glass to increase module efficiency up to 2% and improve self cleaning ability.
• 9BB mono PERC half cell design with less internal power loss to guarantee higher output power and higher module efficiency.
• Half-Cell series PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• High transmittance tempered glass and cell surface textured design ensure excellent performance in low-light environment.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Split junction boxes with high quality diodes to protect electric safety of the whole PV system.
• Mechanical load with high strength: front side max. 5400Pa and rear side max. 2400Pa according to IEC61215 & IEC61730 standards.
• Three channels of EL automatic detections, four times of visual inspections and power test before packing.
• Full production from automatic equipment and production lines to eliminate human errors and scratches.
• Barcode, material and parameter binding data traceable, searchable and freezing.
• Intelligent MES system applied on production lines to reduce waste and ensure higher efficient production.
• Around 0.55% annual power degradation and 30 years linear power damping warranty.
• Optimal packing solutions for container loading and shipment to ensure products safety during transportation.

Extra Care of Full Black Solar Panels from FINERGY

Raw Material QC:

1. Glass: FINERGY sources anti-reflective coated glasses from FLAT Glass or CSG. The QC staffs will take inspections on each glass. Any piece with scratches will be rejected to pass. Otherwise, it will be very clear on full black solar panel.

2. Solar Cell: FINERGY only sources mono PERC solar cells with uniform dark blue color which is only 20% of mass production. Color and characteristics sorting on each cell by machine.

3. Backsheet: FINERGY only sources from Jolywood or 3M who's the top supplier of black backsheet. Both the quality and color are perfect.

4. Aluminum Frames: FINERGY only sources from the fixed supplier with qualified anodized aluminum frame in uniform black color.

Production QC:

1. FINERGY takes performance and visual classification on each solar cell. The similar solar cells are allowed in a panel only.

2. There're 3 channels of EL inspections on automatic production line to ensure the internal quality.

3. FINERGY QC team takes 4 times visual inspections on color matching from solar cells to after lamination. No color mixed solar panel is allowed to send to customers.

4. The frames installation is completed by robots to eliminate scratches on surface.

Automatic Production

Workshop Environment

Certification Trade Mark

Finergy Tech is one of the pioneering solar PV companies in China that has been involved in the production of innovative solar photovoltaic modules from thin silicon cells with high efficiency. The basic materials for the production of photovoltaic modules are: silicon photovoltaic cells, EVA/POE film used to bond silicon cells with glass using the phenomenon of molecular bonding obtained at high temperature, and aluminum frames. The materials are delivered directly by manufacturers - world industry leaders, whose products are characterized by high quality and energy efficiency. The production of PV modules take place on automatic technological lines, which eliminates the risk of human error. Finergy brand solar modules are manufactured in accordance with international standards of IEC61215:2016 and IEC61730:2016. Currently, the capacity of the Finergy Tech production line allows for a production capacity of 500MWp per year. Finergy Tech continuously delivers high quality solar PV modules to customers worldwide, and products are widely used for houses, factories and public facilities in more than 60 countries such as Germany, Italy, Japan, Korea, Australia, Mexico, Chile, etc.

The company's strategy is to provide a product with the highest possible efficiency and quality, while at the same time taking care to maintain a relatively low level of prices for its modules. The company's goal is to promote a natural source of solar energy. The priority task is the quality policy. The company has a quality management system and the following quality certificate:
ISO 9001: 2008 - in the field of investment project management.

In the field of production management, Solar - Energy is certified under the following standards:

ISO 9001: 2008, ISO 14001: 2004, OHSAS18001:2007