89mm 102mm 108mm Idler Conveyor Roller For Belt Conveyor Spare Parts Heavy Load Industry

Superior Roller Idler For Belt Conveyor Using In Heavy Load Industry

Product Overview

Conveyor roller is an important part of the belt conveyor. There are many types and large quantities of rollers, which can support the weight of the conveyor belt and the material been conveyed. The roller accounts for 35% of the total cost of a belt conveyor and generates more than 70% resistance, and plays a key role to extend the life of the conveyor belt, so the quality of the roller is particularly important.

Product Features

1. Strong hardness and high wear resistance;

2. Good Sealing Performance - the carrying roller is fully sealed, and both ends are equipped with labyrinth seals, oil and grease will not leak, which can make the roller runs under a fully sealing state;

3. Long Service Life - the carrying roller can reduce belt wear, keep the belt run in its track, and extends the belt life;

4. Low Operating Cost - carrying rollers can reduce the overall cost of belt conveyors and reduce maintenance man-hours.

There are many types of trough rollers, which are widely used in open-air dusty and corrosive environments, such as power plants, steel plants, cement plants, salt plants, fertilizer plants, docks, etc.

1. During the installation, pay attention to the assembly dimensions of all parts of the fuselage and keep the straightness of the whole machine.

2. Tighten bolts when installing bolt fasteners.

3. The center line of the belt at both ends shall be aligned when making the belt joint to prevent the belt from running off.

4 When installing the protection part of the electric appliance, be careful to prevent damage.

How to packing!!!

Note:

1,According to the requirements of the conveyor, it can be divided into a series of 3 rollers, a series of 5 rollers, or a series of more rollers. 2,Depending on the location of belt conveyor, it can adopt steel rollers and impact rollers to assembly garland idler..