No Drying Double Roller Potash Fertilizer Extrusion Granulation Machine

The series of extrusion granulator drum type, its working principle is: motor driven belts, pulleys, through a reduction gear to a drive shaft, and synchronized by the open passive gear shaft, in one and the same working direction. Material was added from the hopper, by roll forming, release granulation; and crushing the ball transferred to the sieve chamber through a chain, the finished product (ball) was sieved and separated and then mixed back with the new material and re-granulated.

Technical Parameters

Granule Strength and Apperance Type:

Product Introduction

Motor driven pulley, a belt through a reduction gear to a pair of two bodies with high pressure roller for relative sliding mode shell work.

DZJ-I extruder has two rollers, which interact split by the action of one pair of gears.

DZJ-II type two roll extruder directly driven by two dedicated output shaft gear, to achieve the purpose of the extrusion.

Production process, the raw material into the hopper, by a high pressure roller press molding body. After releasing the flow of crushed material a lower portion shaped rollers.

Break Dynamic formed by active pressing roller chain drive sprocket driven by one pair of crushing rollers relative movement.

After crushing and screening finished granules in the working chamber, through the screen to the discharge port outside the machine.

Mainly including compound fertilizer production equipment, organic fertilizer production line equipment, double-roll press granulat