BiDi 1270nm TX 1330nm RX 10km 10G SFP+ Fiber Transceiver DOM LC Single Mode

BiDi 1270nm TX 1330nm RX 10km 10G SFP+ Fiber Transceiver DOM LC Single Mode

Netgear SFP+10G-BXU Compatible BiDi 1270nm-TX/1330nm-RX 10km DOM LC SMF

Product Features

● Supports 9.95 to 11.3Gb/s bit rates

● Simplex LC Connector

● Hot pluggable SFP+ footprint

● Uncooled 1270nm DFB transmitter, 1330nm PIN photo-detector

● Uncooled 1330nm DFB transmitter, 1270nm PIN photo-detector

● Applicable for 10km SMF connection

● Low power consumption, < 1.3W

● Digital Diagnostic Monitor Interface

● Optical interface compliant to IEEE 802.3ae 10GBASE-LR

● Electrical interface compliant to SFF-8431

● Operating case temperature:

Commerical:0 to 70 °C Industrial:-40 to 85 °C

Applications

● 10GBASE-LR at 10.3125Gbps

● 10GBASE-LW at 9.953Gbps

● Other optical link

Product Descriptions

Olinkcom’s OLSBxx1XL-C(I)D10 series single mode transceiver is small form factor pluggable module for optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The OLSBxx1XL-CD10 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for telecommunication.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured with worst ER; BER<10^-12; 2^{31 – 1} PRBS.

More details:

a. This item besides 100% support FS,also compatible with Juniper,Cisco,D-link,Ciena,MikroTik ect.

b. Warranty:3years

c. we have a very professional team of technical,can be always online to give you better solutions based on your problems.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.