Arista Compatible 1000BASE LX SFP 1.25 G 1310nm 10km DOM LC SMF

Arista Compatible 1000BASE LX SFP 1.25 G 1310nm 10km DOM LC SMF

1000BASE-LX SFP 1310nm 10km DOM LC SMF Optical Transceiver Arista Compatible

Product Descriptions

The 1000BASE-LX SFP 1310nm 10km DOM LC SMF Optical Transceiver Arista Compatible applies to dual data-rate of 1.25Gbps/1.0625Gbps and 10km transmission distance with SMF and compatible with Arista. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit.

Digital Diagnostic Specifications

The OLSP3112L-C(I)D10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1. When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

3. Internal/ External Calibration compatible.

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.

2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.

Ordering Information

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.